SIST EN ISO 19085-9:2025 PDF
Woodworking machines - Safety - Part 9: Circular saw benches (with and without sliding table) (ISO 19085-9:2024)
Woodworking machines - Safety - Part 9: Circular saw benches (with and without sliding table) (ISO 19085-9:2024)
- Статус документа:
- Действующий
- Формат:
- Электронный (PDF)
- Количество страниц:
- 55
- Дата публикации:
- 11 декабря 2024 г.
- Издание:
- ISO 19085-9:2024
- ICS:
- 13.110
This document specifies the safety requirements and measures for circular saw benches with or without sliding table or demountable power feed unit or both and capable of continuous production use, also known as “table saws” (in the USA), hereinafter referred to also as “machines”. The machines are designed to cut solid wood and material with similar physical characteristics to wood (see ISO 19085-1:2021, 3.2). This document deals with all significant hazards, hazardous situations and events as listed in Annex A relevant to the machines when operated, adjusted and maintained as intended and under the conditions foreseen by the manufacturer; reasonably foreseeable misuse has been considered too. Transport, assembly, dismantling, disabling and scrapping phases have also been taken into account. This document is also applicable to machines fitted with one or more of the following devices or working units, whose hazards have been dealt with: — device for the main saw blade and scoring saw blade to be raised and lowered through the table; — device to tilt the main saw blade and scoring saw blade for angled cutting; — device for scoring; — device for grooving with milling tool with a width not exceeding 20 mm in one pass; — demountable power feed unit; — additional manually operated sliding table; — powered workpiece clamping device. This document does not apply to: a) machines intended for outdoor use on building sites; NOTE Building site saws (contractor saws) are covered by the requirements of ISO 19085-10:2018. b) handheld woodworking machines including any adaptation permitting their use in a different mode, i.e. bench mounting; c) machines intended for use in a potentially explosive atmosphere; d) machines manufactured prior to the publication of this document.
Abstract
Overview
EN ISO 19085-9:2024 - Woodworking machines - Safety - Part 9: Circular saw benches defines safety requirements and protective measures for circular saw benches (table saws) with or without sliding table and/or a demountable power feed unit intended for continuous production use. Prepared by CEN and aligned with ISO 19085-9:2024, this standard covers machines designed to cut solid wood and materials with similar physical characteristics (see ISO 19085-1:2021). It addresses hazards during normal operation, adjustment, maintenance and foreseeable misuse, and also considers transport, assembly, dismantling, disabling and scrapping.
Key Topics and Requirements
The document sets out technical requirements and risk-reduction measures for circular saw benches, including:
- Control systems and operators’ controls: safety and reliability of control systems, start/stop functions, emergency stop, mode selection and manual reset.
- Tool and drive safety: requirements for saw blade mounting, spindle locking, guards, braking and run-down behaviour.
- Mechanical protections: fixed and interlocking guards, adjustable guards, prevention of contact with moving parts, measures against ejected objects and break-up.
- Adjustments and powered units: safe power-operated adjustments of main and scoring blades (raise/lower, tilt), demountable power feed units, powered clamping and additional sliding tables.
- Special units: scoring devices and grooving with milling tools (single-pass width ≤ 20 mm) and related hazards.
- Systematic hazard coverage: stability, material strength, noise, electrical and energy isolation, maintenance access, marking and operator information.
- Exclusions explicitly listed: building-site/outdoor saws (covered by ISO 19085-10:2018), handheld machines, machines for explosive atmospheres, and machines manufactured before this standard’s publication.
Applications
EN ISO 19085-9:2024 is used to:
- Guide the design and manufacture of safe circular saw benches (table saws) and accessories.
- Support risk assessments, conformity assessments and CE marking under the Machinery Directive (Directive 2006/42/EC - see Annex ZA).
- Define requirements for factory acceptance testing, commissioning, maintenance procedures and operator instructions.
- Inform workshop safety policies and procurement specifications for industrial woodworking and production environments.
Who should use this standard
- Machine manufacturers and product designers
- Safety engineers, compliance officers and test laboratories
- Workplace health & safety managers and procurement specialists
- Installers, service technicians and trainer/instruction authors
Related Standards
- ISO 19085-1:2021 (Part 1 - general safety requirements for woodworking machines)
- ISO 19085-10:2018 (building site/contractor saws)
- Directive 2006/42/EC (Machinery Directive) - Annex ZA relationship provided
EN ISO 19085-9:2024 is essential for ensuring table saw safety, regulatory compliance and consistent hazard control in industrial woodworking.
Технические детали
- Технический комитет
- VSN - Safety of machinery
- SKU
- SIST EN ISO 19085-9:2025
Похожие стандарты
Стандарты, упомянутые в описании
ISO 19085-9:2024
ДействующийWoodworking machines — Safety — Part 9: Circular saw benches (with and without sliding table)
Overview ISO 19085-9:2024 - Woodworking machines - Safety - Part 9: Circular saw benches (with and without sliding table) - sets out safety requirements and measures for table saws designed for conti…
ISO 19085-1:2021
ДействующийWoodworking machines — Safety — Part 1: Common requirements
Overview ISO 19085-1:2021 - Woodworking machines - Safety - Part 1: Common requirements defines the general safety requirements and protective measures for woodworking machines intended for continuou…
ISO 19085-10:2018
ДействующийWoodworking machines — Safety — Part 10: Building site saws (contractor saws)
Overview ISO 19085-10:2018 - Woodworking machines - Safety - Part 10: Building site saws (contractor saws) specifies safety requirements and protective measures for displaceable building site saws de…