SIST EN ISO 1927-5:2013 PDF

Overview

EN ISO 1927-5:2012 (CEN) - Monolithic (unshaped) refractory products - Part 5: Preparation and treatment of test pieces - specifies standardized methods for preparing and treating test specimens made from monolithic (unshaped) refractory materials. The document covers curing, drying and firing of test pieces for dense and insulating castables and ramming materials (four chemical types per ISO 1927-1). It defines specimen dimensions, mixture preparation, compaction methods, storage and post‑treatment to produce repeatable, comparable test specimens for laboratory evaluation.

Key Topics

• Scope & applicability
  • Applies to dense/insulating castables, ramming mixes, taphole clays and dry vibration mixes.
  • Clarifies that laboratory specimen values are reference values and may differ from in‑service behaviour.
• Dimensions and specimen shapes
  • Four standard shapes defined (A, B, C, D) with exact dimensions (e.g., Shape A: 230 × 114 × 64 mm). Shape C is the referee shape for inter‑laboratory testing; 50×50 mm cylindrical specimens permitted for some ramming mixes.
• Mixture preparation and compaction
  • Procedures for mixing (pan mixer design and blade clearances), mixing speeds for dense and low‑intensity insulating castables, and riffle sampling.
  • Compaction methods include vibrating table (uniaxial, 50 Hz, specified amplitude), pneumatic rammer, sand‑rammer and hydraulic press (for plastics).
• Curing, drying and firing
  • Defined post‑treatment sequences for castables, ramming mixes and plastics to achieve stable test pieces prior to property measurement.
• Apparatus & reporting
  • Detailed apparatus requirements (mixer geometry and speeds, vibrating table amplitude, sand‑rammer design) and mandatory test report content (including green bulk density and vibration records).

Applications and Users

• Who uses it
  • Refractory manufacturers, materials laboratories, R&D teams, QA/QC engineers, certification bodies and testing laboratories performing physical and mechanical tests on monolithic refractory products.
• Practical uses
  • Producing reproducible test specimens for measuring physical properties (strength, density, dimensional change, etc.), inter‑laboratory comparisons, product development, quality control and conformity assessment.
• Keywords: monolithic refractory, unshaped refractory, test piece preparation, castable test specimens, ramming materials, curing/drying/firing procedures, ISO 1927-5.

Related Standards

• ISO 1927-1 - Introduction and classification
• ISO 1927-2 - Sampling for testing
• ISO 1927-4 - Determination of consistency of castables
• ISO 1927-6, -7, -8 (other parts in series)
• ISO 10060 - Dense shaped refractory products - test methods for products containing carbon
• Note: EN ISO 1927-5:2012 supersedes EN 1402-5:2003 and is endorsed by CEN.