SIST EN ISO 22476-3:2005 PDF

Name: SIST EN ISO 22476-3:2005 — Geotechnical investigation and testing - Field testing - Part 3: Standard penetration test (ISO 22476-3:2005)
SKU: SIST EN ISO 22476-3:2005
Price: 65.56 EUR
Availability: InStock

Geotechnical investigation and testing - Field testing - Part 3: Standard penetration test (ISO 22476-3:2005)

Название (английский):

SIST EN ISO 22476-3:2005

Geotechnical investigation and testing - Field testing - Part 3: Standard penetration test (ISO 22476-3:2005)

Статус документа:: Действующий
Формат:: Электронный (PDF)
Количество страниц:: 17
Дата публикации:: 1 мая 2005 г.
ICS:: 93.020
Технический комитет:: KON - Structures

Тип поставки:

Full version255 €Read online 24h10 €Read online 72h15 €

Язык документа:

ruen

Срок поставки:3 раб. дн. (перевод)

Цена:255 €

Описание (английский):

ISO 22476-3:2004 specifies requirements for indirect investigations of soil by standard penetration tests within the scope of the geotechnical investigations according to EN 1997-1 and EN 1997-2 to compliment direct investigations (e.g. sampling according to EN ISO 22475-1).

Abstract

Похожие стандарты

Стандарты, упомянутые в описании

Overview

EN ISO 22476-3:2005 - "Geotechnical investigation and testing - Field testing - Part 3: Standard penetration test (SPT)" is a CEN-endorsed ISO standard that specifies requirements for performing the Standard Penetration Test as part of geotechnical investigations in accordance with EN 1997-1 and EN 1997-2. The standard defines equipment, test procedure, measurement and reporting rules for indirect soil investigation by SPT to complement direct sampling (e.g., EN ISO 22475-1).

Key topics and requirements

Purpose and scope: Measures resistance of soil at the borehole base to dynamic penetration of a split-barrel sampler (SPT) and recovers disturbed samples for identification. Also covers SPT(C) using a solid cone in gravelly soils or soft rock.

Test basics: Use of a 63.5 kg hammer dropped 760 mm to drive the sampler. The N‑value is the number of blows required to drive the sampler 300 mm after a 150 mm seating drive.

Equipment:

Split-barrel sampler with non-return valve and specified dimensions.
Drive rods with stiffness to prevent buckling (straight rods, mass limit noted).
Drive-weight assembly (hammer, guide, anvil/drive head, automatic release) with overall mass limit and controlled free-fall.
Optional blow counters and displacement/penetration sensors.

Calibration and energy: The standard requires determination and reporting of the energy ratio (Er) - actual energy delivered vs theoretical hammer energy - because N-values depend on equipment energy. Annex B gives a recommended method to measure actual energy; Annex A lists correction factors (rod length, energy losses, overburden effects).

Procedure and safety: Borehole preparation, seating drive, test drives (minimum two increments of 150 mm), termination rules (e.g., stop at 50 blows for the 300 mm test, 100 blows in soft rock). Mandatory checks, periodic rod straightness verification, and adherence to national safety regulations.

Reporting: Comprehensive field report requirements including project ID, borehole coordinates, equipment details (manufacturer, hammer type, rod type), calibration certificate for Er, raw and corrected N-values, and sampling records.

Applications and users

Primary users: Geotechnical engineers, site investigation contractors, foundation designers, and laboratories performing in-situ testing.

Typical uses:

Assessing strength and deformation properties of cohesionless soils.
Ground characterization for foundation design, earthworks, and excavation stability.
Providing N‑values for correlation with soil parameters, settlement estimates, and design checks.

Complementary role: Used alongside sampling standards (EN ISO 22475-1) and other in-situ tests (cone penetration, pressuremeter tests) to form a complete ground model.

Related standards

EN 1997-1 / EN 1997-2 (geotechnical design and investigations)

EN ISO 22475-1 (sampling by drilling and excavation methods)

Other parts of EN ISO 22476 series covering alternative field tests (cone, pressuremeter, dilatometer)

Keywords: EN ISO 22476-3:2005, Standard Penetration Test, SPT, N‑value, geotechnical investigation, field testing, energy ratio, split-barrel sampler.

SIST EN ISO 22476-3:2005 PDF

Abstract

Похожие стандарты

Overview

Key topics and requirements

Applications and users

Related standards

Технические детали

ISO 22476-3:2005

Geotechnical investigation and testing — Field testing — Part 3: Standard penetration test

ISO 22475-1:2021

Geotechnical investigation and testing — Sampling methods and groundwater measurements — Part 1: Technical pr…

BS EN ISO 22476-1:2023

Geotechnical investigation and testing. Field testing. Electrical cone and piezocone penetration test.