SIST EN ISO 22635:2019 PDF

Name: SIST EN ISO 22635:2019 — Adhesives - Test method for adhesives for plastic or rubber floor coverings or wall coverings - Determination of dimensional changes after accelerated ageing (ISO 22635:2019)
SKU: SIST EN ISO 22635:2019
Price: 60.09 EUR
Availability: InStock

Adhesives - Test method for adhesives for plastic or rubber floor coverings or wall coverings - Determination of dimensional changes after accelerated ageing (ISO 22635:2019)

Название (английский):

SIST EN ISO 22635:2019

Adhesives - Test method for adhesives for plastic or rubber floor coverings or wall coverings - Determination of dimensional changes after accelerated ageing (ISO 22635:2019)

Статус документа:: Действующий
Формат:: Электронный (PDF)
Количество страниц:: 14
Дата публикации:: 3 сентября 2019 г.
Издание:: ISO 22635:2019
ICS:: 83.180

Тип поставки:

Full version210 €Read online 24h10 €Read online 72h15 €

Язык документа:

ruen

Срок поставки:3 раб. дн. (перевод)

Цена:210 €

Описание (английский):

This document specifies a test method that measures the dimensional changes of a plastic or rubber floor or wall covering bonded to a given substrate after accelerated ageing. The term "wall covering" does not include any type of wallpaper.

Abstract

Похожие стандарты

Стандарты, упомянутые в описании

Overview

EN ISO 22635:2019 specifies a laboratory test method for adhesives used with plastic or rubber floor coverings and wall coverings (excluding wallpaper). The standard measures dimensional changes of a bonded covering/substrate assembly after defined accelerated ageing cycles to assess long‑term dimensional stability and the suitability of adhesive–covering combinations.

Key topics and technical requirements

Scope & principle: Monitors dimensional change of a covering bonded to a substrate during predefined conditioning sequences to give a quantitative measure of suitability.

Specimens: Test covering pieces typically (250 × 250) mm or (300 × 300) mm bonded to a fibre cement panel (approx. 8 mm thickness).

Apparatus:

Notched trowel (notch shape per adhesive manufacturer specification).
Roller: ~60 mm width, 90 mm diameter, total mass ~3.50 kg for consolidation.
Heating chamber: ventilated, adjustable between about 20 °C and 200 °C (per ISO 9142 guidance).
Measuring device: elongation meter or comparable instrument capable of 0.01 mm resolution over 200–250 mm.

Preparation & conditioning:

Conditioning of fibre cement substrate (example: 6 h at 80 ± 2 °C).
Fixing datum points/gauge studs to measure changes parallel and perpendicular to grain; edge‑to‑edge measurement options.
Application of adhesive (including primers if required) and bonding under defined procedures.

Procedure: Preconditioning → accelerated ageing conditioning cycles → subsequent cycles; measure and report dimensional change.

Results & reporting: Specifies evaluation, expression of results and test report content. Safety and environmental disposal notes are included.

Applications and practical value

Product development & R&D: Compare adhesive formulations and select adhesives that minimize dimensional drift for vinyl, LVT, rubber or other resilient coverings.

Quality control: Routine testing to confirm production batches meet dimensional stability expectations after simulated ageing.

Specification & procurement: Provide objective data for architects, specifiers and contractors when choosing adhesive/covering systems for floors and walls.

Conformity assessment & certification: Laboratory testing used by test houses and certification bodies to demonstrate compliance with client or regulatory requirements.

Installers & manufacturers: Helps prevent installation failures due to shrinkage, expansion or bond failure by understanding adhesive performance over time.

Related standards

ISO 9142 - guide to laboratory ageing conditions

ISO 554 - standard atmospheres for conditioning/testing

ISO 472 - plastics vocabulary

ISO 15605 - adhesives sampling

EN 1067 - sample preparation for adhesives

Keywords: EN ISO 22635:2019, adhesives test method, dimensional changes, accelerated ageing, plastic floor coverings, rubber floor coverings, fibre cement substrate, elongation meter, notched trowel, heating chamber.

SIST EN ISO 22635:2019 PDF

Abstract

Похожие стандарты

Overview

Key topics and technical requirements

Applications and practical value

Related standards

Технические детали

ISO 22635:2019

Adhesives — Test methods for adhesives for plastic or rubber floor coverings or wall coverings — Determinatio…

SIST EN ISO 9142:2004

Adhesives - Guide to the selection of standard laboratory ageing conditions for testing bonded joints (ISO 91…

SIST ISO 554:1995

Standard atmospheres for conditioning and/or testing -- Specifications

ISO 472:2013/Amd 1:2018

Plastics — Vocabulary — Amendment 1: Additional items

SIST EN ISO 15605:2004

Adhesives - Sampling (ISO 15605:2000)