SIST EN ISO 2811-4:2011 PDF

Name: SIST EN ISO 2811-4:2011 — Paints and varnishes - Determination of density - Part 4: Pressure cup method (ISO 2811-4:2011)
SKU: SIST EN ISO 2811-4:2011
Price: 60.09 EUR
Availability: InStock

Paints and varnishes - Determination of density - Part 4: Pressure cup method (ISO 2811-4:2011)

Название (английский):

SIST EN ISO 2811-4:2011

Paints and varnishes - Determination of density - Part 4: Pressure cup method (ISO 2811-4:2011)

Статус документа:: Действующий
Формат:: Электронный (PDF)
Количество страниц:: 15
Дата публикации:: 12 октября 2011 г.
ICS:: 87.040
Технический комитет:: IBLP - Paints and varnishes

Тип поставки:

Full version225 €Read online 24h10 €Read online 72h15 €

Язык документа:

ruen

Срок поставки:3 раб. дн. (перевод)

Цена:225 €

Описание (английский):

ISO 2811-4:2011 specifies a method for determining the density of paints, varnishes and related products using a pressure cup. The method is suitable for products which are aerated. Emulsion paints, for example, often trap small air bubbles, and these might still be present when the density is measured. It is not, however, suitable for textured paints which contain coarse particles.

Abstract

Похожие стандарты

Стандарты, упомянутые в описании

Overview

EN ISO 2811-4:2011 - "Paints and varnishes - Determination of density - Part 4: Pressure cup method" is a CEN-adopted ISO standard that specifies a laboratory pressure cup method to measure the density of paints, varnishes and related products. The method is intended for aerated products (for example, many emulsion paints that trap small air bubbles) but is not suitable for textured paints containing coarse particles. Results are reported in grams per cubic centimetre (g/cm³) at a defined test temperature.

Key topics and technical requirements

Principle: A known-volume cylindrical pressure cup (nominal 100 cm³) compresses the sample to reduce errors from entrapped air; density is calculated from mass difference and calibrated cup volume.

Test temperature: Carry out at (23.0 ± 0.5) °C (other agreed temperatures may be used); sample and apparatus must be conditioned and temperature variation ≤ 0.5 °C.

Apparatus:

Pressure cup with screw-driven piston and pressure-release cap (release at ~1.0 ± 0.1 MPa).
Balance accurate to 10 mg; thermometer accurate to 0.2 °C; temperature-controlled chamber.

Procedure: Single determination on a fresh, prepared sample. Fill cup, apply pressure until calibration collar stops and excess liquid is expelled, clean and weigh.

Calibration & verification: Periodic calibration of cup volume (Annex A) using pure water; pressure-release and volume checks required.

Reporting & precision:

Report density to the nearest 0.001 g/cm³.
Include cup identification, test temperature, any deviations and anomalies.
Repeatability limit (r) for non-aerated materials: 0.005 g/cm³.

Referenced standards: ISO 1513 (sample prep), ISO 3696 (water purity), ISO 15528 (sampling).

Applications and users

This standard is practical for:

Quality control and R&D laboratories in paint and coatings manufacturing.

Formulation engineers and technical service teams assessing filling, packing and dosing operations.

Independent testing laboratories required to provide traceable density measurements for product specifications.

Engineers controlling filling machines, where uncorrected density values are used for machine calibration.

Typical uses:

Verifying batch-to-batch density for volumetric filling.

Comparing densities of aerated emulsion paints.

Providing standardized density data for product data sheets and regulatory reporting.

Related standards

EN ISO 2811 series:

Part 1: Pyknometer method
Part 2: Immersed body (plummet) method
Part 3: Oscillation method
Part 4: Pressure cup method (this document)

Normative references: ISO 1513, ISO 3696, ISO 15528

Keywords: EN ISO 2811-4:2011, pressure cup method, density measurement, paints and varnishes, aerated paints, emulsion paints, laboratory testing, calibration, filling-machine control.

SIST EN ISO 2811-4:2011 PDF

Abstract

Похожие стандарты

Overview

Key topics and technical requirements

Applications and users

Related standards

Технические детали

ISO 2811-4:2011

Paints and varnishes — Determination of density — Part 4: Pressure cup method

SIST EN ISO 15138:2018

Petroleum and natural gas industries - Offshore production installations - Heating, ventilation and air-condi…

SIST EN ISO 3696:1998

Water for analytical laboratory use - Specification and test methods (ISO 3696:1987)

BS EN ISO 15528:2020

Paints, varnishes and raw materials for paints and varnishes. Sampling.

SIST EN ISO 2811-3:2024

Paints and varnishes - Determination of density - Part 3: Oscillation method (ISO 2811-3:2023)