SIST EN ISO 28706-1:2012 PDF

Name: SIST EN ISO 28706-1:2012 — Vitreous and porcelain enamels - Determination of resistance to chemical corrosion - Part 1: Determination of resistance to chemical corrosion by acids at room temperature (ISO 28706-1:2008)
SKU: SIST EN ISO 28706-1:2012
Price: 60.09 EUR
Availability: InStock

Vitreous and porcelain enamels - Determination of resistance to chemical corrosion - Part 1: Determination of resistance to chemical corrosion by acids at room temperature (ISO 28706-1:2008)

Название (английский):

SIST EN ISO 28706-1:2012

Vitreous and porcelain enamels - Determination of resistance to chemical corrosion - Part 1: Determination of resistance to chemical corrosion by acids at room temperature (ISO 28706-1:2008)

Статус документа:: Действующий
Формат:: Электронный (PDF)
Количество страниц:: 15
Дата публикации:: 17 ноября 2011 г.
ICS:: 25.220.50
Технический комитет:: IPKZ - Protection of metals against corrosion

Тип поставки:

Full version225 €Read online 24h10 €Read online 72h15 €

Язык документа:

ruen

Срок поставки:3 раб. дн. (перевод)

Цена:225 €

Описание (английский):

ISO 28706-1:2008 describes a test method for the determination of the resistance of vitreous and porcelain enamelled articles to attack by an acid at room temperature, and also specifies a method of classifying the results.

Abstract

Похожие стандарты

Упомянутые в описании и другие стандарты SIST

Overview

EN ISO 28706-1:2011 (ISO 28706-1:2008) specifies a standardized laboratory test method to determine the resistance of vitreous and porcelain enamelled articles to chemical corrosion by acids at room temperature. Adopted by CEN as a European standard, this part of the ISO 28706 series defines how to expose enamel surfaces to acidic solutions, record effects and classify results for quality control, specification and comparison purposes.

Key topics and requirements

Scope and principle: Describes the corrosion mechanism for enamel (silica network hydrolysis and leaching of constituents) and the rationale for room-temperature acid testing.

Test solutions and reagents: Defines specific acid tests (notably citric acid and sulfuric acid at room temperature) and provides provisions for other acidic solutions. (See Clauses 9–11.)

Materials and apparatus: Lists required equipment and specimen preparation methods to ensure reproducible exposure and measurement.

Procedure: Specifies how specimens are attacked by the test solution, post-exposure determination and measurement steps (mass loss per unit area, visual examination).

Classification and reporting: Requires classification of the enamel resistance based on measured effects and a standardized test report including test solution, test time, observed mass loss or visual changes and relevant test conditions.

Interpretation of results: Notes that attack behaviour can be linear or logarithmic; for some conditions a corrosion rate (e.g., mass loss per unit area per time) can be calculated, while for others only mass loss and appearance are reported.

Practical applications and users

Manufacturers of vitreous and porcelain enamel coatings - to validate product durability and support technical datasheets.

Quality control and assurance teams - for incoming inspection and production lot verification.

Independent test laboratories - to provide accredited acid resistance testing and certified reports.

Product designers and specifiers - to select enamel grades suitable for acidic service environments.

Regulatory bodies and purchasers - to compare materials against harmonized test criteria.

Typical practical outcomes include detection of staining, surface roughening or measurable mass loss; highly resistant enamels may show no visible change under the specified tests.

Related standards

EN ISO 28706 series (Parts 2–5) - covers other acid and alkaline corrosion tests (boiling acids, alkaline liquids, closed systems, vapour-phase tests).

EN 14483-1:2004 - superseded by EN ISO 28706-1:2011.

Keywords: EN ISO 28706-1:2011, ISO 28706-1:2008, vitreous enamel chemical corrosion, acid resistance test, porcelain enamels, citric acid test, sulfuric acid test, corrosion classification, mass loss per unit area.

SIST EN ISO 28706-1:2012 PDF

Abstract

Похожие стандарты

Overview

Key topics and requirements

Practical applications and users

Related standards

Технические детали

ISO 28706-1:2008

Vitreous and porcelain enamels — Determination of resistance to chemical corrosion — Part 1: Determination of…

SIST ISO 28706-2:2021

Vitreous and porcelain enamels -- Determination of resistance to chemical corrosion

SIST EN ISO 6338:2026

Method to calculate GHG emissions at LNG plant (ISO 6338:2023)

SIST-TP CEN ISO/ASTM TR 52958:2026

Additive manufacturing of metals - Powder bed fusion (PBF) - In-situ coaxial photodiode monitoring for lack o…

SIST EN ISO 41002:2026

Facility management - Development of the facility management organization (ISO 41002:2026)

SIST EN ISO 844:2026

Rigid cellular plastics - Determination of compressive properties (ISO 844:2026)

SIST-TS CEN ISO/TS 17664-3:2026

Processing of health care products - Information to be provided by the medical device manufacturer for the pr…

SIST EN ISO 8980-4:2026

Ophthalmic optics - Uncut finished spectacle lenses - Part 4: Specifications and test methods for the propert…