SIST EN ISO 29466:2023 PDF

Name: SIST EN ISO 29466:2023 — Thermal insulating products for building applications - Determination of thickness (ISO 29466:2022)
SKU: SIST EN ISO 29466:2023
Price: 60.09 EUR
Availability: InStock

Thermal insulating products for building applications - Determination of thickness (ISO 29466:2022)

Название (английский):

SIST EN ISO 29466:2023

Thermal insulating products for building applications - Determination of thickness (ISO 29466:2022)

Статус документа:: Действующий
Формат:: Электронный (PDF)
Количество страниц:: 16
Дата публикации:: 9 января 2023 г.
Издание:: (ISO 29466:2022)
ICS:: 91.100.60

Тип поставки:

Full version240 €Read online 24h10 €Read online 72h15 €

Язык документа:

ruen

Срок поставки:3 раб. дн. (перевод)

Цена:240 €

Описание (английский):

This document specifies the equipment and procedures for determining the thickness of full‑size products. It is applicable to thermal insulating products. This document provides the reference method. Other methods can be used (e.g. for quality control), provided a correlation has been established with this reference method; Annex B gives some examples of such methods.

Abstract

Похожие стандарты

Упомянутые в описании и другие стандарты SIST

Overview - EN ISO 29466:2022 (Thermal insulating products - Determination of thickness)

EN ISO 29466:2022 (adopted by CEN) defines a reference method for measuring the thickness of full‑size thermal insulating products used in building applications. The standard specifies required apparatus, specimen preparation and conditioning, step‑by‑step measurement procedures, how to calculate and report results, and provides normative annexes for compressed products and examples of alternative methods. This method is the benchmark for correlating other test procedures used for quality control.

Key topics and technical requirements

Scope: Applicable to full‑size thermal insulating products; provides the reference method (other methods may be used only if correlated to this one).

Apparatus:

Dial gauge mounted on a rigid frame with a maximum permissible error of 0.5 mm.
200 mm square pressure plate that applies a total pressure of (50 ± 1.5) Pa or (250 ± 5) Pa (including dial gauge force).
Flat rigid base plate at least as large as the specimen.

Specimen preparation and conditioning:

Retain any facings/coatings.
Store specimens at least 6 h at (23 ± 5) °C; in disputes use (23 ± 2) °C and (50 ± 5)% RH.
For tropical conditions, use (27 ± 2) °C and (65 ± 5)% RH and record in the report.
Annex A addresses preparation of compressed products.

Measurement procedure:

Place specimen on baseplate (faced side down if coated), apply pressure plate and dial gauge centrally.
Number and positions of measurements depend on specimen length (e.g., two measurements for ≤600 mm, four for >600 mm to ≤1 500 mm, plus one for each additional 500 mm).
Record individual readings and calculate the mean thickness, expressed in millimetres to the nearest millimetre (or higher accuracy if specified).

Reporting: Test report must reference ISO 29466:2022 and include product ID, pre‑test history, conditioning, deviations, test conditions, pressure used, individual values and mean.

Applications - who uses this standard

Manufacturers - product development, conformity, packaging and release testing.

Independent testing laboratories - accredited thickness verification and certification testing.

Quality control / QC teams - routine production checks (after establishing correlation if using alternative rapid methods).

Specifiers, building inspectors and regulators - verifying declared thickness for thermal performance calculations and compliance.

Standards developers - aligning product standards to a common reference thickness method.

Related standards and notes

EN ISO 29466:2022 supersedes EN 823:2013 and was prepared by ISO/TC 163 in collaboration with CEN/TC 88.

Annex B provides examples of alternative methods (allowed only when correlated to this reference method).

The document notes that a formal statement of method accuracy will be included in a future revision.

Keywords: EN ISO 29466:2022, thermal insulating products, determination of thickness, insulation thickness measurement, test method, reference method, conditioning, dial gauge, pressure plate.

SIST EN ISO 29466:2023 PDF

Abstract

Похожие стандарты

Overview - EN ISO 29466:2022 (Thermal insulating products - Determination of thickness)

Key topics and technical requirements

Applications - who uses this standard

Related standards and notes

Технические детали

ISO 29466:2022

Thermal insulating products for building applications — Determination of thickness

SIST EN ISO 6338:2026

Method to calculate GHG emissions at LNG plant (ISO 6338:2023)

SIST-TP CEN ISO/ASTM TR 52958:2026

Additive manufacturing of metals - Powder bed fusion (PBF) - In-situ coaxial photodiode monitoring for lack o…

SIST EN ISO 41002:2026

Facility management - Development of the facility management organization (ISO 41002:2026)

SIST EN ISO 844:2026

Rigid cellular plastics - Determination of compressive properties (ISO 844:2026)

SIST-TS CEN ISO/TS 17664-3:2026

Processing of health care products - Information to be provided by the medical device manufacturer for the pr…

SIST EN ISO 8980-4:2026

Ophthalmic optics - Uncut finished spectacle lenses - Part 4: Specifications and test methods for the propert…

SIST EN ISO 5361:2023/A1:2026

Anaesthetic and respiratory equipment - Tracheal tubes and connectors - Amendment 1: Reinstatement of third e…