SIST EN ISO 3175-6:2019 PDF

Overview

EN ISO 3175-6:2019 / ISO 3175-6:2019 defines a standardized procedure for testing cleaning and finishing performance of textiles using decamethylpentacyclosiloxane (D5) as the drycleaning solvent. Prepared by ISO/TC 38 and adopted by CEN (EN ISO 3175-6:2019), the document covers procedures for both normal and sensitive materials, detailing machine, reagent and finishing requirements so that cleaned specimens can be assessed consistently (in line with ISO 3175-1).

Key SEO keywords: decamethylpentacyclosiloxane, D5, drycleaning, textiles, ISO 3175-6:2019, professional care, test procedure.

Key topics and technical requirements

• Scope & principle: Procedure for drycleaning textile specimens in commercial machines with D5, followed by restorative finishing; specimens are then evaluated per ISO 3175-1.
• Reagents:
  • Decamethylpentacyclosiloxane (D5) - listed properties include flashpoint 77 °C and boiling point 210 °C.
  • Model detergent: cocofattyaciddiethanolamide (used as an emulsifier for controlled water addition).
• Machine and apparatus:
  • Commercial drycleaning machine with reversible rotating cage (diameter 600–1 080 mm, depth ≥300 mm) and 3–4 lifters.
  • Specified g-factor ranges for cleaning (0.5–0.8) and extraction (100–300) with formula provided for calculation.
  • Controls required: solvent and air temperature, solvent temperature measurement, incoming/outgoing air temp to ±2 °C, dosing apparatus for gradual emulsion addition, and automatic solvent dryness control.
• Finishing equipment:
  • Iron (~1.5 kg, sole area 150–200 cm²) and steam press with bucks (~0.35 m² each) and steam pressure ≈500 kPa.
• Materials classification: Definitions and different procedures for normal materials (tolerant of standard process) and sensitive materials (require restricted mechanical action, drying temperature or water addition).
• Practical test parameters: Conditioning, specimen preparation, number of cycles and reporting requirements are specified; note that 3–5 cycles often reveal progressive property changes.

Applications and users

This standard is intended for:

• Textile testing laboratories and quality assurance teams evaluating drycleanability and finish durability.
• Garment and textile manufacturers assessing material compatibility with D5 solvent.
• Drycleaning equipment manufacturers validating machine performance and controls.
• Certification bodies and standards committees harmonizing professional care methods.

Practical uses include comparative performance testing, product development decisions (fabric and trim selection), and establishing care-label recommendations for professional cleaning with D5.

Related standards

• ISO 3175-1 - Assessment of performance after cleaning and finishing (referenced for evaluation methods).
• ISO 3175 series - Other parts covering procedures and classifications for professional care of textiles.
• ISO 139 - Standard atmospheres for conditioning and testing.

Safety note: observe standard safety precautions when operating drycleaning equipment and handling solvents.