SIST EN ISO 3452-5:2009 PDF

Name: SIST EN ISO 3452-5:2009 — Non-destructive testing - Penetrant testing - Part 5: Penetrant testing at temperatures higher than 50 degrees C (ISO 3452-5:2008)
SKU: SIST EN ISO 3452-5:2009
Price: 60.09 EUR
Availability: InStock

Non-destructive testing - Penetrant testing - Part 5: Penetrant testing at temperatures higher than 50 degrees C (ISO 3452-5:2008)

Название (английский):

SIST EN ISO 3452-5:2009

Non-destructive testing - Penetrant testing - Part 5: Penetrant testing at temperatures higher than 50 degrees C (ISO 3452-5:2008)

Статус документа:: Действующий
Формат:: Электронный (PDF)
Количество страниц:: 14
Дата публикации:: 26 февраля 2009 г.
ICS:: 19.100
Технический комитет:: PKG - Testing of metallic materials

Тип поставки:

Full version210 €Read online 24h10 €Read online 72h15 €

Язык документа:

ruen

Срок поставки:3 раб. дн. (перевод)

Цена:210 €

Описание (английский):

ISO 3452-5:2008 specifies the requirements for non-destructive testing using penetrant, particular to applications at higher temperatures (higher than 50 °C) as well as the method for qualification of suitable testing products.

Abstract

Похожие стандарты

Стандарты, упомянутые в описании

Overview

EN ISO 3452-5:2008 (ISO 3452-5:2008) defines requirements for penetrant testing (liquid penetrant inspection) when performed at temperatures higher than 50 °C. This part of the ISO 3452 series covers special process controls, qualification methods for penetrant materials intended for high-temperature use, and safety and personnel requirements. It is intended for users and manufacturers who need robust non‑destructive testing (NDT) procedures for elevated-temperature applications.

Key topics and requirements

Scope & applicability: Applies to penetrant testing materials and procedures used above 50 °C; products must be qualified for the relevant temperature range and used per the manufacturer’s instructions.

Qualification procedure: Manufacturer-conducted type tests using thermostatic cells and defined reference blocks. Key steps include stabilizing the block, heating to 20 °C above the test point, applying penetrant at the test temperature, maintaining temperature for the qualification time, removing excess, applying developer, and inspection.

Temperature ratings and test points:

Medium (M): 50 °C and 100 °C (range 50–100 °C)
High (H): 100 °C, 150 °C, 200 °C (range 100–200 °C)
Manufacturer-specified ranges (A, B) tested at 50 °C intervals
Tolerance ±5 °C for test points

Performance criteria: Candidate materials must demonstrate similar or better performance than reference products; quantitative tests should show at least 90% of reference performance.

Reference artefacts: Use Type 1 reference blocks (quantitative) and Annex A comparator matched-pair blocks (qualitative) for evaluation.

Equipment & controls: Requires additional equipment beyond ISO 3452-2: thermostatic cell (stability at least 50 °C above max test temp), high-temperature gloves and brush, and a contact surface thermometer (±5 °C).

Safety & personnel: Special safety measures for high temperature (skin burns, flammability, volatility, ventilation). Personnel should be suitably certified (e.g., ISO 9712, EN 473) and trained on high-temperature considerations.

Process documentation: Process times must be linked to working temperatures and recorded in written procedures.

Applications - who uses this standard

NDT technicians and service providers performing high-temperature penetrant inspections

Manufacturers of penetrant test materials developing or qualifying high-temperature products

Quality, inspection and reliability engineers in industries such as aerospace, automotive, power generation, oil & gas, metallurgy, and foundries

Test laboratories and certification bodies that validate penetrant material performance

Related standards

ISO 3452-1 (General principles)

ISO 3452-2 (Testing of penetrant materials)

ISO 3452-3 (Reference test blocks)

ISO 3059 (Viewing conditions)

ISO 12706, ISO/TS 18173 (Terminology and general NDT terms)

Keywords: EN ISO 3452-5:2008, ISO 3452-5, penetrant testing, non‑destructive testing, high temperature NDT, penetrant qualification, reference blocks, thermostatic cell.

SIST EN ISO 3452-5:2009 PDF

Abstract

Похожие стандарты

Overview

Key topics and requirements

Applications - who uses this standard

Related standards

Технические детали

ISO 3452-5:2008

Non-destructive testing — Penetrant testing — Part 5: Penetrant testing at temperatures higher than 50 degree…

BS EN ISO 3452-3:2013

Non-destructive testing. Penetrant testing. Reference test blocks.

SIST EN ISO 3452-2:2021

Non-destructive testing - Penetrant testing - Part 2: Testing of penetrant materials (ISO 3452-2:2021)

SIST EN ISO 9712:2022

Non-destructive testing - Qualification and certification of NDT personnel (ISO 9712:2022)

SIST EN ISO 3452-1:2021

Non-destructive testing - Penetrant testing - Part 1: General principles (ISO 3452-1:2021)

SIST EN ISO 3059:2013

Non-destructive testing - Penetrant testing and magnetic particle testing - Viewing conditions (ISO 3059:2012)

SIST EN ISO 12706:2011

Non-destructive testing - Penetrant testing - Vocabulary (ISO12706:2009)

ISO/TS 18173:2005

Non-destructive testing — General terms and definitions