SIST EN ISO 3691-3:2017/A1:2023 PDF

Overview

EN ISO 3691-3:2016/A1:2023 (CEN adoption of ISO 3691-3:2016/Amd 1:2023) is an amendment that updates safety requirements and verification for industrial trucks with an elevating operator position and trucks specifically designed to travel with elevated loads. Published March 2023 and endorsed by CEN, the amendment updates normative references, redefines key terms, and adds or clarifies technical requirements for platforms, guards, interlocks and braking. Note: through decision 429/2021 the work item was decoupled from EU legislation.

Key topics and technical requirements

• Scope and terminology: Updates include replacement of ISO/TS 3691-7 with EN 16307-3:2023 and revised references to ISO 6292:2020 and ISO 5053-1:2020.
• Elevating operator position: Defined as an operator platform that can be elevated more than 1 200 mm from ground level (unladen).
• Guarding requirements: Elevated and fixed stand-on platforms above 1 200 mm must have mechanical guards (railings, gates) on all sides.
• Strength criteria: Mechanical guards shall withstand 900 N vertical downward and 900 N horizontal inward-to-outward forces at weakest locations, and must not open outwards.
• Supplementary platforms and defined walking surfaces: Rules for supplementary platforms (including pallets used as a walking surface) require positive engagement to prevent shifting; disposable pallets are not allowed when intended as a defined walking surface.
• Interlocks: If platform or walking-surface interlocks are fitted, elevating shall be disabled above 1 200 mm when the platform or walking surface is not detected. Gates/opening must disable elevating, lowering and travel when height ≥ 1 200 mm.
• Personal fall protection systems: Accepted alternative to interlocking gates in some cases; subject to regional requirements (see EN 16307-3:2023 and ISO/TS 3691-8:2019).
• Braking: For operations without guidance systems, braking performance shall conform to ISO 6292:2020, Table 2 or 3, group C. Travel above 9 km/h may be subject to additional regional requirements.

Applications and users

This amendment is primarily used by:

• Industrial truck manufacturers and design engineers updating machine designs for elevated-operation models
• Safety engineers and compliance officers preparing declarations of conformity and technical files
• Testing and certification laboratories verifying guarding, interlocks, braking and fall-protection arrangements
• Fleet managers and procurement teams specifying safe trucks for warehousing, mezzanine handling, order picking and elevated-load transport

Related standards

• EN 16307-3:2023 (supplementary requirements referenced by this amendment)
• ISO 6292:2020 (braking performance)
• ISO 5053-1:2020 (vocabulary / types of industrial trucks)
• ISO/TS 3691-8:2019 (personal fall protection considerations)

Keywords: EN ISO 3691-3:2016/A1:2023, industrial trucks safety, elevating operator position, elevated loads, mechanical guards, platform interlock, defined walking surface, ISO 6292:2020, EN 16307-3:2023.