SIST EN ISO 4499-4:2016 PDF

Overview

EN ISO 4499-4:2016 - Hardmetals - Metallographic determination of microstructure - Part 4: Characterisation of porosity, carbon defects and eta-phase content - specifies standardized metallographic methods to detect and quantify porosity, uncombined carbon (graphite) defects, and eta-phase (η-phase) in hardmetals (typical WC/Co materials). The standard is part of the ISO 4499 series for hardmetal microstructure assessment and is intended for powder‑metallurgy produced materials where small levels of porosity or secondary phases can affect density, strength and performance.

Key topics and technical requirements

• Scope and purpose: procedures for identifying the presence, type and distribution of porosity, graphite (carbon) defects and eta‑phase in hardmetals.
• Apparatus: use of metallographic optical microscopes and scanning electron microscopes (SEM) for observation and measurement.
• Calibration: images and measuring systems must be calibrated against a stage micrometre traceable to a national reference; SIRA grids are noted for SEM calibration. Optical setups should use Köhler illumination for best resolution.
• Sample preparation: careful grinding and progressive diamond polishing (down to ~1 µm) to produce surfaces free of grinding/polishing marks and avoid particle pull‑out that can mimic porosity.
• Etching: required to reveal eta‑phase particles; eta can appear as large rosettes or small particles depending on carbon content.
• Measurement methods: descriptive identification and quantitative approaches (for example, intercept methods on micrographs) using parameters such as Equivalent Circle Diameter (ECD), intercept lengths, particle counts, magnification and reporting of measurement uncertainty.
• Reporting: standardized test report content and consideration of measurement uncertainty are included.

Applications and practical value

• Quality control and acceptance testing of cutting tools, wear parts and inserts made from WC/Co hardmetals.
• Process control for powder metallurgy manufacturers (sintering, composition adjustments) to avoid unwanted graphite or eta‑phase formation.
• Failure analysis and root‑cause investigations where porosity or secondary phases affect mechanical properties.
• R&D and materials development for new hardmetal grades and coatings.

Who should use this standard

• Metallurgists and materials engineers working with hardmetals (WC/Co).
• Metallography and materials testing laboratories (optical/SEM labs).
• Quality assurance teams in powder metallurgy and cutting‑tool manufacturing.
• Standards bodies and procurement engineers specifying microstructural acceptance criteria.

Related standards

• ISO 4499 series (e.g., ISO 4499‑2:2008 - Measurement of WC grain size).
• ISO/TC 119 publications covering sampling and testing methods for hardmetals.

Keywords: hardmetals, metallography, porosity measurement, carbon defects, eta‑phase, ISO 4499‑4, WC/Co, SEM calibration, powder metallurgy.