SIST EN ISO 5821:2025 PDF

Overview - EN ISO 5821:2025 (Female electrode caps for spot welding)

EN ISO 5821:2025, adopted by CEN from ISO 5821:2025, specifies the dimensions and tolerances of female electrode caps used for resistance spot welding of metallic materials. This third edition updates and replaces the previous edition (2009/2010) and standardizes preferred taper 1:10 configurations, dimensional tables, and marking/designation rules to ensure interchangeability and reliable welding performance.

Key topics and technical requirements

• Scope: Dimensions and tolerances for female (internal taper) electrode caps for resistance spot welding.
• Taper fits: Taper dimensions and tolerances follow ISO 1089; locking tapers are covered separately by ISO 20168.
• Materials: Electrode materials must comply with ISO 5182 (materials for electrodes and ancillary equipment).
• Dimensions & types: Standard defines multiple cap types (e.g., A0, B0, C0, D0, D1, E0, F0, F1, G0) with preferred values in Table 1 and accompanying drawings (Figure 1).
• Tolerances: Numeric tolerances (examples from Table 2) include:
  • d ± 0,15 mm (outer diameter)
  • d1 ± 0,2 mm
  • l ± 0,5 mm (nominal lengths where applicable)
  • α ± 1° (angle)
  • c (circularity) ± 0,02 mm
• Performance guidance: Informative Table 3 gives example maximum electrode forces (for d = 13, 16, 20 mm) depending on electrode hardness (≤ 150 HV and > 150 HV).
• Cooling features: Illustrative water‑cooling hole bottom profiles and guidance on hole depth (Figure 2) to improve cooling efficiency for different cap lengths.
• Designation, labelling & marking: A standard designation format is defined (example sequence: “ISO 5821 - Type - d - l - R - d1 - α - e”), plus package labelling and individual cap marking requirements.

Applications and who uses this standard

• Welding equipment and electrode manufacturers - design, produce and specify compatible female electrode caps.
• Tooling and maintenance engineers - ensure proper cap selection, interchangeability and maintenance (tip dressing, cooling).
• Quality, procurement and compliance teams - verify incoming parts meet dimensional tolerances and marking/traceability needs.
• Welding process engineers - match cap geometry, contact area and cooling to welding schedules and base materials.

Keywords: EN ISO 5821:2025, female electrode caps, spot welding electrodes, resistance welding, electrode dimensions, tolerances, ISO 1089, ISO 5182.

Related standards

• ISO 1089 - Electrode taper fits for spot welding equipment (taper dimensions/tolerances)
• ISO 5182 - Materials for electrodes and ancillary equipment
• ISO 20168 - Electrode caps with locking tapers
• ISO 5830 - Male electrode caps
• ISO 17677-1 - Resistance welding vocabulary (terms/definitions)