SIST EN ISO 6506-1:2014 PDF

Overview

EN ISO 6506-1:2014 (CEN adoption of ISO 6506-1:2014) defines the Brinell hardness test method for metallic materials. It specifies how to produce and measure a spherical indentation using a tungsten‑carbide ball indenter and convert the measured indentation to a Brinell hardness value (HBW). The standard applies to both fixed‑location and portable hardness testing machines and is the primary reference for routine Brinell hardness testing in industry and laboratories.

Key topics and technical requirements

• Principle: Force a polished tungsten‑carbide ball (diameter D) into the test surface; measure the mean indentation diameter (d) after unloading and calculate HBW from the applied force and indentation geometry.
• Apparatus: Testing machine capable of forces from about 9.807 N to 29.42 kN, polished tungsten‑carbide ball indenters, and optical/mechanical diameter measuring systems (see ISO 6506‑2 for verification/calibration of machines).
• Test forces / designations: Standardized force/ball combinations and HBW notation are used (designation includes hardness symbol, ball diameter, applied force and test duration).
• Indentation limits: The indentation diameter should generally be between 0.24 D and 0.6 D; deviations must be reported.
• Specimen requirements: Surface must be smooth, free of scale/lubricant; thickness should be at least eight times the indentation depth (see Annex B for minimum thickness rules).
• Test conditions: Recommended ambient temperature 10 °C to 35 °C (commonly controlled to 23 °C ±5 °C); application and dwell times specified (nominal application ~7 s, dwell ~14 s with tolerance ranges).
• Positioning rules: Minimum distance from edge to center ≥ 2.5 × mean indentation diameter; spacing between indentations ≥ 3 × mean indentation diameter.
• Uncertainty & verification: Procedures for uncertainty estimation and machine periodic checks are included (Annex A and Annex C).

Applications and users

EN ISO 6506-1:2014 is used for:

• Quality control and acceptance testing in foundries, steel mills, aluminum and copper alloy producers.
• Metallurgical and mechanical testing laboratories for material characterization.
• Fabrication and maintenance teams assessing hardness on castings, forgings and large components where macro‑hardness is required.
• Portable on-site hardness testing when fixed machines are impractical.

Typical users: metallurgists, QA/QC engineers, NDT technicians, test lab managers, and production engineers needing reliable Brinell hardness values (HBW).

Related standards

• ISO 6506-2:2014 - Verification and calibration of Brinell testing machines
• ISO 6506-3:2014 - Calibration of reference blocks
• ISO 6506-4 - Table of Brinell hardness values
• ISO 4498 - Sintered metal materials (references ISO 6506‑1 for Brinell testing)

Keywords: EN ISO 6506-1, ISO 6506-1:2014, Brinell hardness test, HBW, metallic materials, hardness testing machines, tungsten carbide ball, indentation diameter, hardness testing standard.