SIST EN ISO 7765-1:2004 PDF
Plastics film and sheeting - Determination of impact resistance by the free-falling dart method - Part 1: Staircase methods (ISO 7765-1:1988)
Plastics film and sheeting - Determination of impact resistance by the free-falling dart method - Part 1: Staircase methods (ISO 7765-1:1988)
- Статус документа:
- Действующий
- Формат:
- Электронный (PDF)
- Количество страниц:
- 9
- Дата публикации:
- 1 октября 2004 г.
- ICS:
- 83.140.10
- Технический комитет:
- IPMA - Polimer materials and products
Specifies methods for the determination of the energy, that causes plastics films and sheet less than 1 mm in thickness to fail under specified conditions of impact of a free falling dart from a specified height, tha would result in failure of 50 % of the specimes tested. Two methods are described. Method A employs a dart with 38 mm diameter hemispherical head, dropped from a height of 0,66 m, and method B employs a dart with a 50 mm diameter hemispherical head dropped from a height of 1,50 m. The measurement technique is the stairecase method.
Abstract
Overview
EN ISO 7765-1:2004 - "Plastics film and sheeting - Determination of impact resistance by the free-falling dart method - Part 1: Staircase methods" specifies a standardized laboratory procedure to determine the energy (expressed as the missile mass causing failure) that will make plastic films and sheets (
Технические детали
- SKU
- SIST EN ISO 7765-1:2004
Похожие стандарты
Другие стандарты SIST