SIST EN ISO 8510-2:2011 PDF

Name: SIST EN ISO 8510-2:2011 — Adhesives - Peel test for a flexible-bonded-to-rigid test specimen assembly - Part 2: 180 degree peel (ISO 8510-2:2006)
SKU: SIST EN ISO 8510-2:2011
Price: 60.09 EUR
Availability: InStock

Adhesives - Peel test for a flexible-bonded-to-rigid test specimen assembly - Part 2: 180 degree peel (ISO 8510-2:2006)

Название (английский):

SIST EN ISO 8510-2:2011

Adhesives - Peel test for a flexible-bonded-to-rigid test specimen assembly - Part 2: 180 degree peel (ISO 8510-2:2006)

Статус документа:: Действующий
Формат:: Электронный (PDF)
Количество страниц:: 13
Дата публикации:: 13 апреля 2011 г.
ICS:: 83.180
Технический комитет:: IPMA - Polimer materials and products

Тип поставки:

Full version195 €Read online 24h10 €Read online 72h15 €

Язык документа:

ruen

Срок поставки:3 раб. дн. (перевод)

Цена:195 €

Описание (английский):

ISO 8510-2:2006 specifies a 180° peel test for the determination, under specified conditions, of the peel resistance of a bonded assembly of two adherends where one adherend is flexible and the other is rigid.

Abstract

Похожие стандарты

Стандарты, упомянутые в описании

Overview

EN ISO 8510-2:2010 (identical to ISO 8510-2:2006) defines a standardized 180° peel test to determine the peel resistance of a bonded assembly where one adherend is flexible and the other is rigid. The method is used to characterise adhesive performance under controlled conditions and to report reproducible peel force values for quality control, R&D and specification compliance.

Key topics and technical requirements

Scope: Measures peel resistance for flexible-to-rigid bonded assemblies (180° peel). (A 90° peel variant is given in ISO 8510-1 for less flexible adherends.)

Apparatus: Tensile testing machine with constant grip-separation rate and force measurement accuracy within ±2%; grips to clamp the rigid adherend and a self-aligning grip for the flexible adherend.

Specimen geometry and materials:

Rigid adherend width: 25.0 mm ± 0.5 mm, minimum length 200 mm.
Recommended adherend thicknesses: metals 1.5 mm; plastics 1.5 mm; wood 3 mm; compounded rubbers 2 mm (other thicknesses by agreement).
Flexible adherend: bendable through 180° without gross irreversible change; recommended length ≥ 350 mm; width equal to rigid adherend or 5 mm wider at each edge for fraying-prone materials.

Preparation: Surface treatment per ISO 17212 or manufacturer instructions. Apply adhesive over full width to 150 mm length; pressing with up to 1 MPa recommended; measure adhesive thickness where practicable.

Conditioning and atmosphere: Use standard atmospheres from ISO 291.

Test procedure: Bend back the free end, clamp specimens, and apply a constant separation rate. Recommended rate 100 mm/min ± 10 mm/min. Record force vs. separation autographically and continue until at least 125 mm of bonded length has separated.

Results expression: For each specimen determine the average peel force (N) over at least 100 mm of peel length, excluding the first 25 mm; report maximum/minimum forces and arithmetic means across at least 5 specimens.

Reporting & precision: Include adhesive and adherend IDs, surface prep, test conditions, and failure mode (adhesive, cohesive, adherend). Inter-laboratory precision is not yet available (no precision statement).

Applications and users

Who uses it: adhesive manufacturers, materials test labs, automotive and aerospace engineers, manufacturers of tapes/laminates, quality control and R&D teams, and standards writers.

Practical uses: comparative performance testing, incoming quality control, product development (adhesive selection), contract acceptance testing, and forensic analysis of bonded joint failures.

Related standards

ISO 8510-1 - 90° peel test (alternative for less flexible adherends)

ISO 291 - Standard atmospheres for conditioning/testing

ISO 17212 - Surface preparation guidelines for bonding

ISO 5725 - Statistical treatment of precision and accuracy

EN 28510-2:1993 - superseded by EN ISO 8510-2:2010

Keywords: adhesives peel test, 180° peel, EN ISO 8510-2, peel resistance, flexible-to-rigid bond, tensile testing, adhesive testing standard.

SIST EN ISO 8510-2:2011 PDF

Abstract

Похожие стандарты

Overview

Key topics and technical requirements

Applications and users

Related standards

Технические детали

ISO 8510-2:2006

Adhesives — Peel test for a flexible-bonded-to-rigid test specimen assembly — Part 2: 180° peel

ISO 8510-1:1990

Adhesives — Peel test for a flexible-bonded-to-rigid test specimen assembly — Part 1: 90 degree peel

ISO 17212:2004

Structural adhesives — Guidelines for the surface preparation of metals and plastics prior to adhesive bonding

BS ISO 2910:2018

Cinematography. Screen luminance and chrominance for the projection of film motion pictures.

ISO 5725-6:1994/Cor 1:2001

Accuracy (trueness and precision) of measurement methods and results — Part 6: Use in practice of accuracy va…