SIST EN ISO 8655-9:2022 PDF

Overview

EN ISO 8655-9:2022 - "Piston-operated volumetric apparatus - Part 9: Manually operated precision laboratory syringes" is the CEN-endorsed European adoption of ISO 8655-9:2022. The standard sets the metrological and design requirements for manually operated precision laboratory syringes (glass or glass-and-metal) intended to deliver a selected volume (Ex). It covers maximum permissible errors, marking, user information and basic construction and material expectations for syringes used to deliver liquids and gases, including micro‑syringes graduated in microlitres.

Key topics and technical requirements

• Scope: Requirements for glass or glass-and-metal manually operated precision syringes used in laboratory dispensing and sampling.
• Metrological requirements: Defines accuracy, repeatability and maximum permissible errors for delivered volumes and references gravimetric, photometric, and alternative measurement procedures in the ISO 8655 series.
• Design & materials:
  • Syringes shall consist of barrel, plunger (piston) and nozzle/needle holder; barrel flanges (finger grips) for ergonomic handling.
  • Materials must allow cleaning; glass must meet hydrolytic resistance requirements (see ISO 719).
  • Scale marking must be permanent, uniform and readable; the zero must be visible if marked.
• Construction requirements: The system must be leak‑tight; graduation lines must be uniform in thickness and spacing; fiduciary/zero alignment rules are defined.
• User information & marking: Manufacturers must provide user guidance, declared nominal volume, calibration and adjustment basis, and clear marking on instruments.
• Reference measurement methods: The standard refers to ISO 8655-6 (gravimetric), ISO 8655-8 (photometric) and ISO 8655-7 (alternative procedures) for volume determination.

Practical applications and intended users

• Manufacturers use EN ISO 8655-9:2022 to design, test and declare compliance of precision laboratory syringes.
• Calibration laboratories and test houses apply the metrological requirements and referenced measurement procedures for independent calibration and verification.
• Laboratory quality managers and users rely on the standard for procurement specifications, routine checks and safe handling practices to ensure accurate liquid and gas delivery in analytical, synthetic and dosing workflows.
• Applicable across clinical, research, environmental and industrial laboratories where precise volumetric delivery (including micro‑volume dispensing) is required.

Related standards

• ISO 8655-1:2022 - Terminology, general requirements and user recommendations
• ISO 8655-6 - Gravimetric reference measurement procedure
• ISO 8655-7 - Alternative measurement procedures
• ISO 8655-8 - Photometric reference measurement procedure
• ISO 719 - Glass hydrolytic resistance test
• ISO 3696 - Water for analytical laboratory use
• ISO 4787 & ISO 7886-1 - Related material and syringe terminology

Keywords: EN ISO 8655-9:2022, manually operated precision laboratory syringes, piston-operated volumetric apparatus, syringe calibration, metrological requirements, laboratory syringe standards.