SIST EN ISO 887:2002 PDF

Name: SIST EN ISO 887:2002 — Plain washers for metric bolts, screws and nuts for general purposes - General plan (ISO 887:2000)
SKU: SIST EN ISO 887:2002
Price: 51.9 EUR
Availability: InStock

Plain washers for metric bolts, screws and nuts for general purposes - General plan (ISO 887:2000)

Название (английский):

SIST EN ISO 887:2002

Plain washers for metric bolts, screws and nuts for general purposes - General plan (ISO 887:2000)

Статус документа:: Действующий
Формат:: Электронный (PDF)
Количество страниц:: 10
Дата публикации:: 1 июля 2002 г.
ICS:: 21.060.30
Технический комитет:: ISEL - Mechanical elements

Тип поставки:

Full version150 €Read online 24h10 €Read online 72h15 €

Язык документа:

ruen

Срок поставки:2 раб. дн. (перевод)

Цена:150 €

Описание (английский):

La présente Norme internationale spécifie la gamme complète de dimensions nominales des rondelles plates de grades A et C pour vis et écrous de diamètre nominal de filetage de 1 mm à 150 mm inclus pour usages généraux.La présente Norme internationale n'est pas applicable aux rondelles pour les vis avec rondelle incorporée pour ce qui est des diamètres et des épaisseurs de trous de passage.L'information sur l'emploi des rondelles plates est donnée dans l'annexe A.

Abstract

Похожие стандарты

Стандарты, упомянутые в описании

Overview

EN ISO 887:2000 (ISO 887:2000) - "Plain washers for metric bolts, screws and nuts for general purposes - General plan" - defines the general dimensional system and preferred combinations for plain (flat) washers used with metric fasteners. Published by ISO (Technical Committee ISO/TC 2 - Fasteners) and adopted as a CEN/EN national standard, it covers nominal thread diameters from 1 mm to 150 mm and describes product grades A and C. The standard is a general plan: it establishes ranges of clearance holes, outside diameters, thicknesses and preferred dimension combinations, and refers to separate product standards for detailed series and forms.

Key topics and technical requirements

Scope: Full range of nominal dimensions for plain washers for general-purpose bolts, screws and nuts (1 mm to 150 mm). Not intended for screw-and-washer assembly hole/thickness design.

Clearance holes: Clearance hole diameters are selected in accordance with ISO 273 (fine series for smaller sizes and thin washers, medium series for larger or thicker washers); note ISO 273 tolerances are for information only - actual washer tolerances are specified elsewhere.

Outside diameters: A defined set of outside diameter values (see Table 1 in the standard) provides consistent selection across size ranges.

Thicknesses: Nominal thickness options are given (examples include 0.3, 0.5, 0.8, 1, 1.2, 1.6, 2, etc., up to larger values shown in the standard tables).

Preferred combinations: Table 3 lists preferred nominal combinations of inner diameter, outside diameter and thickness, grouped into small, normal, large and extra-large series and mapped to product grades A and C.

Tolerances: Dimensional tolerances for plain washers are specified by ISO 4759-3.

Guidance: Annex A (informative) provides guidance on matching washers to bolts, screws and nuts by hardness classes and product grades; it also references application-specific considerations.

Applications and users

EN ISO 887 is intended for:

Fastener manufacturers and tooling suppliers establishing product ranges and catalogs.

Mechanical designers and engineers specifying washers for machinery, automotive, construction and general engineering.

Procurement and quality engineers who verify conformity to dimensional and tolerance requirements.

Standards committees and testing laboratories referencing baseline washer dimensions and preferred combinations.

Practical benefits include standardized interchangeability, simplified procurement, and clearer design rules for washer selection with metric bolts and nuts.

SIST EN ISO 887:2002 PDF

Abstract

Похожие стандарты

Overview

Key topics and technical requirements

Applications and users

Related standards

Технические детали

ISO 887:2000

Plain washers for metric bolts, screws and nuts for general purposes — General plan

BS EN ISO 2738:2026

Sintered metal materials, excluding hardmetals. Permeable sintered metal materials. Determination of density,…

SIST EN ISO 4759-3:2016

Tolerances for fasteners - Part 3: Washers for bolts, screws and nuts - Product grades A, C and F (ISO 4759-3…

ISO 8871-3:2003/Amd 1:2018

Elastomeric parts for parenterals and for devices for pharmaceutical use — Part 3: Determination of released-…

SIST EN ISO 7089:2002

Plain washers - Normal series - Product grade A (ISO 7089:2000)