SIST EN ISO 9692-1:2013 PDF

Overview

EN ISO 9692-1:2013 - "Welding and allied processes - Types of joint preparation - Part 1" defines recommended types and dimensional ranges of joint preparation for welding steels. It covers joint forms used for full-penetration butt welds and fillet welds when using manual metal arc (MMA/SMAW), gas-shielded metal arc (MIG/MAG/GMAW), gas (oxyfuel) welding, TIG (GTAW) and beam welding (laser and electron). The standard focuses on reproducible joint shapes and practical details (for example, root gaps after tack welding and edge finish requirements).

Key topics and requirements

• Scope and materials: Applicable to all kinds of steel and the welding processes listed above.
• Joint types: Provides recommended joint geometries for one-sided and two-sided butt welds, fillet welds and variants (V, U, bevel, J, etc.). Dimension ranges are supplied to guide design and fabrication.
• Dimensional guidance: Tables (Tables 1–4) list common joint shapes and frequently used dimension ranges rather than manufacturing tolerances - intended as design limits adaptable to process and quality level.
• Root gap and tack welding: Root gaps specified are those remaining after tack welding (if used).
• Finish: Longitudinal root-face edges should be de-burred and may be chamfered (up to 2 mm).
• Process classification: Welding processes referenced by ISO 4063 numbers (e.g., MMA, MIG/MAG, TIG, electron/laser beam) to align joint choices with process capabilities.
• Practical adjustments: The standard notes that joint details can be altered to facilitate techniques such as temporary backing, centering lips, or one-sided welding where appropriate.
• Design intent: Dimension ranges reflect good-practice defaults based on experience; project-specific codes or sectors (e.g., pipelines, clad steels) may specify narrower ranges.

Applications and users

EN ISO 9692-1:2013 is used by:

• Welding engineers and designers selecting joint geometry for steel fabrication
• Fabrication shops and welding contractors producing butt and fillet welds
• Quality managers and welding inspectors preparing or verifying WPS (Welding Procedure Specifications)
• Procurement and standards teams ensuring interoperability and compliance across suppliers Benefits include reduced rework, consistent weld quality, and clearer WPS/WPQ alignment with process capabilities (MMA, MIG/MAG, TIG, beam).

Related standards

• ISO 6947 - Welding and allied processes - Welding positions (normative reference)
• Other parts of ISO 9692 (Part 2: submerged arc welding; Part 3: MIG/TIG for aluminium; Part 4: clad steels) are related for different materials/processes.

Keywords: EN ISO 9692-1:2013, joint preparation, butt welds, fillet welds, welding of steels, MMA, MIG, MAG, TIG, beam welding, root gap, backing, welding design.