SIST EN ISO 9934-1:2017 PDF

Overview

EN ISO 9934-1:2016 - Non-destructive testing - Magnetic particle testing - Part 1: General principles (ISO 9934-1:2016) is a CEN-adopted ISO standard that specifies the general principles for performing magnetic particle testing (MPT) on ferromagnetic materials. The standard focuses on reliable detection of surface-breaking discontinuities (especially cracks) and near-surface flaws. It defines required procedures for surface preparation, magnetization, detection media use, result recording and interpretation - but does not set acceptance criteria and does not cover the residual magnetization method.

Key topics and technical requirements

• Scope & intent: Primarily for detection of surface-breaking cracks; sensitivity falls rapidly with depth below the surface.
• Surface preparation: Test areas must be free of dirt, scale, weld spatter, grease, oil and other contaminants. Non-ferromagnetic coatings up to ~50 µm (e.g., intact paint) generally do not impair sensitivity - thicker coatings require verification.
• Magnetization:
  • Minimum magnetic flux density recommended: B = 1 T as adequate for testing.
  • Typical tangential field to achieve sensitivity: ≈ 2 kA/m (actual field depends on material permeability, temperature and field level).
  • Waveform control and measurement: use instruments that respond directly to the waveform (e.g., true RMS meters); avoid devices that calculate values theoretically.
  • Covers multiple magnetizing techniques (current-flow and magnetic-flow methods) and verification of magnetization.
• Detection media & application: Requirements for selection, testing and application of magnetic particle media (fluorescent and non‑fluorescent). Contrast aids may be used for non-fluorescent methods.
• Procedure, recording & interpretation: Tests should follow written procedures to ensure repeatability; guidance provided for viewing conditions, overall performance tests, indication interpretation, demagnetization, cleaning and test reporting.
• Personnel & safety: Recommends qualified personnel (e.g., certification per ISO 9712 or equivalent). Highlights safety and environmental considerations due to strong magnetic fields.

Practical applications - who uses this standard

• NDT inspectors, weld inspectors and quality engineers performing magnetic particle testing
• Manufacturers and fabricators in aerospace, automotive, oil & gas, rail, and heavy engineering where ferromagnetic components require crack detection
• Inspection agencies, certification bodies and product standards writers who need a baseline method for MPT procedures
• Training organizations developing MPT courses and competency assessments

Related standards

• ISO 9934-2 (Detection media)
• ISO 9934-3 (Equipment)
• ISO 12707 (Vocabulary)
• ISO 3059 (Viewing conditions)
• EN 1330-1 / EN 1330-2 (NDT terminology)
• ISO 9712 (Personnel certification)

EN ISO 9934-1:2016 is essential for implementing repeatable, safe and verifiable magnetic particle testing procedures for ferromagnetic materials and for aligning MPT practice with international NDT expectations.