SIST ISO 15242-4:2020 PDF

Name: SIST ISO 15242-4:2020 — Rolling bearings - Measuring methods for vibration - Part 4: Radial cylindrical roller bearings with cylindrical bore and outside surface
SKU: SIST ISO 15242-4:2020
Price: 60.09 EUR
Availability: InStock

Rolling bearings - Measuring methods for vibration - Part 4: Radial cylindrical roller bearings with cylindrical bore and outside surface

Название (английский):

SIST ISO 15242-4:2020

Rolling bearings - Measuring methods for vibration - Part 4: Radial cylindrical roller bearings with cylindrical bore and outside surface

Статус документа:: Действующий
Формат:: Электронный (PDF)
Количество страниц:: 16
Дата публикации:: 20 июля 2020 г.
ICS:: 17.160
Технический комитет:: ISEL - Mechanical elements

Тип поставки:

Full version240 €Read online 24h10 €Read online 72h15 €

Язык документа:

ruen

Срок поставки:3 раб. дн. (перевод)

Цена:240 €

Описание (английский):

ISO 15242-4:2017 specifies vibration measuring methods for single-row and double-row radial cylindrical roller bearings with cylindrical bore and outside surface, under established measurement conditions.

Abstract

Похожие стандарты

Стандарты, упомянутые в описании

Overview

ISO 15242-4:2017 - part of the ISO 15242 series - defines standardized measuring methods for vibration of single-row and double-row radial cylindrical roller bearings with cylindrical bore and outside surface. The standard specifies established measurement conditions, default rotational speeds, frequency bands, loading and lubrication conditions, and requirements for test fixtures and transducer placement to ensure repeatable vibration measurement results.

Key topics and technical requirements

Scope: Vibration measurement methods for radial cylindrical roller bearings (single- and double-row) on test equipment under defined conditions.

Default rotational frequencies: 1 800 min⁻¹ for bearings with outside diameter up to 100 mm, and 900 min⁻¹ for bearings larger than 100 mm up to 200 mm (other speeds may be agreed between manufacturer and customer).

Measured quantity: Root mean square (RMS) vibration velocity, ν (µm/s), measured in the radial direction.

Frequency bands: Default banding into Low (L), Medium (M) and High (H) ranges. Examples from the standard:

For 900 min⁻¹: L = 25–150 Hz; M = 150–900 Hz; H = 900–5 000 Hz.
For 1 800 min⁻¹: L = 50–300 Hz; M = 300–1 800 Hz; H = 1 800–10 000 Hz.

Loading: Radial load magnitudes are specified by bearing outside diameter (default values given in the standard). For bearings that accept axial load, up to 30 N axial load may be applied to the outer ring to ensure stability.

Lubrication and bearing condition:

Prelubricated bearings (greased/oiled/sealed) are measured in the as-delivered condition.
Non-prelubricated bearings must be cleaned and lubricated with fine filtered oil (kinematic viscosity typically 10–100 mm²/s) and given a running-in period.

Test rig and transducer requirements: The spindle/mandrel must be sufficiently stiff; loading mechanisms must allow the ring to vibrate normally; transducer location, measurement direction and alignment of applied loads are specified to minimize test variability.

Optional analyses: Time-domain detection of pulses/spikes (surface defects) and narrow-band spectral analysis as supplementary methods.

Applications and who uses it

Bearing manufacturers - production acceptance testing and quality control.

Test laboratories - comparative performance testing and diagnostic evaluation.

Design and R&D teams - characterizing bearing vibration behavior for product development.

Condition monitoring and vibration engineers - establishing baseline vibration signatures and interpreting bearing-related vibration in rotating machines. Practical benefits include repeatable, comparable vibration data for acceptance criteria, root-cause diagnosis, and noise reduction efforts.

Related standards

ISO 15242-1:2015 (Fundamentals)

ISO 1132-1 (Rolling bearings - Tolerances)

ISO 2041 (Mechanical vibration vocabulary)

ISO 5593 (Rolling bearings - Vocabulary)

ISO 286-2 (GPS tolerances)

Keywords: ISO 15242-4:2017, rolling bearings, vibration measurement, radial cylindrical roller bearings, RMS vibration velocity, test conditions, frequency bands, bearing acceptance.

SIST ISO 15242-4:2020 PDF

Abstract

Похожие стандарты

Overview

Key topics and technical requirements

Applications and who uses it

Related standards

Технические детали

ISO 15242-4:2017

Rolling bearings — Measuring methods for vibration — Part 4: Radial cylindrical roller bearings with cylindri…

ISO 15242-1:2015

Rolling bearings — Measuring methods for vibration — Part 1: Fundamentals

BS EN ISO 1524:2020

Paints, varnishes and printing inks. Determination of fineness of grind.

SIST ISO 1132-1:2002

Rolling bearings -- Tolerances -- Part 1: Terms and definitions

BS ISO 20415:2019

Trusted mobile e-document framework. Requirements, functionality and criteria for ensuring reliable and safe…

SIST ISO 5593:2023

Rolling bearings - Vocabulary

ISO 286-2:2010/Cor 1:2013

Geometrical product specifications (GPS) — ISO code system for tolerances on linear sizes — Part 2: Tables of…