SIST ISO 254:2012 PDF

Name: SIST ISO 254:2012 — Belt drives - Pulleys - Quality, finish and balance
SKU: SIST ISO 254:2012
Price: 43.71 EUR
Availability: InStock

Belt drives - Pulleys - Quality, finish and balance

Название (английский):

SIST ISO 254:2012

Belt drives - Pulleys - Quality, finish and balance

Статус документа:: Действующий
Формат:: Электронный (PDF)
Количество страниц:: 7
Дата публикации:: 27 сентября 2012 г.
ICS:: 21.220.10
Технический комитет:: DTN - Lift and transport appliances

Тип поставки:

Full version105 €Read online 24h10 €Read online 72h15 €

Язык документа:

ruen

Срок поставки:2 раб. дн. (перевод)

Цена:105 €

Описание (английский):

This International Standard specifies the characteristics of quality which are common to all transmission pulleys. It establishes specific quality levels for the finish and balance of transmission pulleys and test pulleys. This International Standard is applicable to transmission pulleys for V-belts, V-ribbed belts, flat or synchronous belts; it does not apply to those pulleys for variable speed drives that have one or more moving flanges. The other characteristics of transmission pulleys can be found in the relevant International Standards.

Abstract

Похожие стандарты

Упомянутые в описании и другие стандарты SIST

Overview

SIST ISO 254:2012 specifies common quality characteristics for transmission pulleys and establishes defined levels for surface finish and balance. It applies to pulleys used with V‑belts, V‑ribbed belts, flat belts and synchronous belts, and includes requirements for test pulleys. It does not apply to pulleys for variable‑speed drives that have one or more moving flanges. Normative references include ISO 4287 (surface texture) and ISO 1940‑1 (balance quality grades).

Key Topics

Material and selection: Pulleys shall be made of materials that can be shaped to standardized dimensions and tolerances and that withstand service conditions (heat, mechanical stress, abrasion, environment). Materials should be capable of dissipating significant heat generated by belts.

Surface roughness (Ra): SIST ISO 254:2012 defines maximum allowable Ra values for working surfaces:

V‑pulley and V‑ribbed pulley grooves and all pulley bores: 3.2 µm
Flat pulley rims and rim edges: 6.3 µm
Synchronous pulley tooth flanks and tips:
- industrial drives: 3.2 µm
- high‑performance drives (e.g., automotive): 1.6 µm

For test pulleys, the standard requires finer finishes (all listed working surfaces at 1.6 µm Ra). Edges of flat rims and grooves shall be chamfered or radiused to avoid sharp transitions.

Balance requirements: Balancing reduces out‑of‑balance forces during rotation. Two balancing classes are considered:

Static balancing (one plane) - typically sufficient for most pulleys and required for stock items.
Dynamic balancing (two planes) - may be necessary for wide‑faced rims or pulleys operating at higher speeds.

Residual eccentric mass after static balancing shall not exceed the larger of:

0.005 kg, or

0.2% of the equivalent mass of the pulley (equivalent mass = mass of a geometrically identical pulley made of cast iron).

When operational speed is known, SIST ISO 254:2012 advises checking the limiting speed to determine if dynamic balancing per ISO 1940‑1 is necessary.

Applications

SIST ISO 254:2012 is directly useful for:

Manufacturers specifying machining and finishing tolerances for transmission and test pulleys.

Quality and inspection teams verifying surface roughness, edge treatment and balance acceptance criteria.

Procurement and engineering teams writing purchase specifications for pulleys used in industrial drives, automotive test rigs, and laboratory test pulleys.

Test laboratories that require defined surface and balance conditions for reproducible dynamic testing of belt drives.

Related Standards

ISO 4287 - Geometrical product specifications (GPS): surface texture (profile method).

ISO 1940‑1 - Mechanical vibration: balance quality requirements for rotors; used for dynamic balancing guidance and grade determination.

SIST ISO 254:2012 provides practical, measurable requirements for surface finish and balance that directly support reliable belt‑drive performance, reduced vibration and consistent test results.

SIST ISO 254:2012 PDF

Abstract

Похожие стандарты

Overview

Key Topics

Applications

Related Standards

Технические детали

ISO 4287:1997/Amd 1:2009

Geometrical Product Specifications (GPS) — Surface texture: Profile method — Terms, definitions and surface t…

ISO 1940-1:1986

Mechanical vibration — Balance quality requirements of rigid rotors — Part 1: Determination of permissible re…

SIST EN ISO 6338:2026

Method to calculate GHG emissions at LNG plant (ISO 6338:2023)

SIST-TP CEN ISO/ASTM TR 52958:2026

Additive manufacturing of metals - Powder bed fusion (PBF) - In-situ coaxial photodiode monitoring for lack o…

SIST EN ISO 41002:2026

Facility management - Development of the facility management organization (ISO 41002:2026)

SIST EN ISO 844:2026

Rigid cellular plastics - Determination of compressive properties (ISO 844:2026)

SIST-TS CEN ISO/TS 17664-3:2026

Processing of health care products - Information to be provided by the medical device manufacturer for the pr…

SIST EN ISO 8980-4:2026

Ophthalmic optics - Uncut finished spectacle lenses - Part 4: Specifications and test methods for the propert…