SIST ISO 3662:1995 PDF

Name: SIST ISO 3662:1995 — Hydraulic fluid power -- Pumps and motors -- Geometric displacements
SKU: SIST ISO 3662:1995
Price: 31.42 EUR
Availability: InStock

Hydraulic fluid power -- Pumps and motors -- Geometric displacements

Название (английский):

SIST ISO 3662:1995

Hydraulic fluid power -- Pumps and motors -- Geometric displacements

Статус документа:: Действующий
Формат:: Электронный (PDF)
Количество страниц:: 4
Дата публикации:: 1 августа 1995 г.
ICS:: 23.100.10
Технический комитет:: IHPV - Hydraulics and pneumatics

Тип поставки:

Full version60 €Read online 24h10 €Read online 72h15 €

Язык документа:

ruen

Срок поставки:1 раб. дн. (перевод)

Цена:60 €

Описание (английский):

Establishes the geometric displacements of pumps and motors having rotating or oscillating drives, and is also applicable to variable displacement units; in such cases, the values refer to the maximum displacement. The displacements specified may be used to derive other basic design criteria and normal ratings. Tabulates nominal values for diplacements from 0,1 up to and including 9000 millilitres per revolution.

Abstract

Похожие стандарты

Стандарты, упомянутые в описании

Overview

ISO 3662:1976 - "Hydraulic fluid power - Pumps and motors - Geometric displacements" standardizes the geometric displacement values for hydraulic pumps and motors with rotating or oscillating drives. It covers fixed and variable displacement units (for variable units, the values refer to the maximum displacement) and provides a table of nominal displacements from 0.1 to 9 000 millilitres per revolution (ml/rev). These nominal values are intended for convenient designation and can be used to derive other basic design criteria and normal ratings.

Key topics

Definition of geometric displacement: the calculated total of all volume changes in pressure chambers caused by movement of displacement elements during one shaft revolution or one double stroke of an oscillating drive. Tolerances, clearances, distortions and deformations are not included.

Nominal displacement table: preferred values (R10 series recommended) from 0.1 ml/rev up to 9 000 ml/rev; values printed in parentheses are non-preferred.

Application to variable displacement units: displacement values in the standard refer to maximum displacement for such units.

Designation and identification: provides a standardized identification statement for test reports, catalogues and sales literature to declare conformity.

Guidance on extended ranges: for displacements above 9 000 ml/rev, specify values using R20 series numbers; R10 is the preferred series.

Applications

ISO 3662 is practical for:

Hydraulic pump and motor design - selecting and specifying nominal geometric displacements for performance and sizing calculations.

Manufacturer catalogs and product identification - using standardized displacement denominations for marketing and procurement.

Test reports and certification - declaring compliance with a recognized international displacement series.

System engineering - deriving pump/motor ratings and matching components in hydraulic fluid power systems (positive displacement devices).

Keywords: ISO 3662, geometric displacement, hydraulic fluid power, hydraulic pumps, hydraulic motors, nominal displacement, ml/rev, variable displacement.

Who should use this standard

Hydraulic equipment designers and OEMs specifying pump and motor displacements.

Technical writers and catalog managers producing product literature or datasheets.

Test laboratories and certification bodies preparing reports.

Purchasing and maintenance engineers selecting replacement components or matching system elements.

Related standards

ISO 5598 - Fluid power vocabulary (definitions referenced by ISO 3662).

ISO 497 - Guide to choice of series of preferred numbers (R-series guidance used for nominal values).

Identification statement example for documentation: "Geometric displacements conform to ISO 3662, Hydraulic fluid power - Pumps and motors - Geometric displacements."

SIST ISO 3662:1995 PDF

Abstract

Похожие стандарты

Overview

Key topics

Applications

Who should use this standard

Related standards

Технические детали

ISO 3662:1976

Hydraulic fluid power — Pumps and motors — Geometric displacements

BS ISO 366-2:2009

Textile machinery and accessories. Reeds. Dimensions and designation of metal reeds with plate baulk.

ISO 5598:1985

Fluid power systems and components — Vocabulary

SIST EN ISO 4973:2023

Cosmetics - Microbiology - Quality control of culture media and diluents used in cosmetics standards (ISO 497…