SIST ISO 5715:1995 PDF

Name: SIST ISO 5715:1995 — Equipment for harvesting -- Dimensional compatibility of forage harvesting machinery
SKU: SIST ISO 5715:1995
Price: 43.71 EUR
Availability: InStock

Equipment for harvesting -- Dimensional compatibility of forage harvesting machinery

Название (английский):

SIST ISO 5715:1995

Equipment for harvesting -- Dimensional compatibility of forage harvesting machinery

Статус документа:: Действующий
Формат:: Электронный (PDF)
Количество страниц:: 7
Дата публикации:: 1 сентября 1995 г.
ICS:: 65.060.50
Технический комитет:: IMKG - Machinery for agriculture and forestry

Тип поставки:

Full version105 €Read online 24h10 €Read online 72h15 €

Язык документа:

ruen

Срок поставки:2 раб. дн. (перевод)

Цена:105 €

Описание (английский):

Specifies the requirements for dimensional compatibility of harvesting machines and transport vehicles necessary to ensure satisfactory operation. Dimensions specified pertain to forage harvesters, forage trailers, dump boxes and forage conveyors when used in normal sequence. Six figures contain illustrations which are for dimensional reference only and do not indicate design details.

Abstract

Похожие стандарты

Другие стандарты SIST

Overview

SIST ISO 5715:1995 defines dimensional compatibility requirements for forage harvesting machinery to ensure satisfactory operation when machines are used in normal sequence. The standard covers forage harvesters, forage trailers, dump boxes and forage conveyors and applies to forage crops such as legumes, grasses (including cereals) and other forage crops, either fresh or wilted. Six illustrative figures are included in the original document for dimensional reference only and do not indicate design details.

Key Topics

Purpose: Ensure physical compatibility between harvesters, trailers, dump boxes and conveyors so transferred material can be handled safely and efficiently.

Scope: Dimensions apply when machines are used in the normal sequence (harvester → trailer → dump box/forage blower → store).

Illustrations: Figures are for dimensional reference and are not to scale or design intent.

Representative dimensional requirements (as given in SIST ISO 5715:1995):

Rear drawbar minimum vertical load-carrying capacity: 1 300 kg.

Horizontal distance from rear drawbar hitch point to spout tip: 1 850 mm maximum.

Spout height (top of blower spout, cap level): 3 050 ± 150 mm; auxiliary spout for lorries: 3 550 ± 150 mm; extending spout max extension: 4 000 ± 150 mm.

Spout lateral offset capability: up to 750 mm from harvester centre line.

Forage trailer exterior box width: 2 350 mm maximum.

Trailer cover/hood clearance: bottom surface at least 3 350 mm above ground.

Cross-discharge and outlet widths: 610 mm maximum for cross discharge or dump box cross conveyor outlet.

Dump box: input-end bed floor max height 230 mm, output-end min height 650 mm; min internal width at input 2 450 mm, output bed width max 2 500 mm.

Forage conveyors: max height to top of feed conveyor sides 585 mm; minimum drive-through conveyor length 2 750 mm; hopper-fed conveyor hopper min 750 mm in both horizontal directions.

(These values are extracted directly from the standard and are intended to illustrate the kinds of dimensional limits ISO 5715 specifies.)

Applications

Equipment manufacturers use SIST ISO 5715:1995 to design compatible harvesters, trailers and conveyors that interoperate without modification.

Agricultural contractors and fleet managers use these dimensions to select compatible combinations and reduce on-field downtime and transfer losses.

Agricultural equipment safety and ergonomic planning benefit from standardized interface clearances and heights.

Related Standards

Developed by ISO/TC 23 (Tractors and machinery for agriculture and forestry).

Use alongside manufacturer guidance, vehicle coupling standards and other ISO agricultural machinery standards to ensure full interoperability and safe operation.

Practical value: Implementing SIST ISO 5715:1995 dimensions helps manufacturers and operators achieve predictable machine interfaces, reduce field adjustments, improve material flow and enhance operational safety during forage harvesting and transport.

SIST ISO 5715:1995 PDF

Abstract

Похожие стандарты

Overview

Key Topics

Applications

Related Standards

Технические детали

SIST EN ISO 6338:2026

Method to calculate GHG emissions at LNG plant (ISO 6338:2023)

SIST-TP CEN ISO/ASTM TR 52958:2026

Additive manufacturing of metals - Powder bed fusion (PBF) - In-situ coaxial photodiode monitoring for lack o…

SIST EN ISO 41002:2026

Facility management - Development of the facility management organization (ISO 41002:2026)

SIST EN ISO 844:2026

Rigid cellular plastics - Determination of compressive properties (ISO 844:2026)

SIST-TS CEN ISO/TS 17664-3:2026

Processing of health care products - Information to be provided by the medical device manufacturer for the pr…

SIST EN ISO 8980-4:2026

Ophthalmic optics - Uncut finished spectacle lenses - Part 4: Specifications and test methods for the propert…

SIST EN ISO 5361:2023/A1:2026

Anaesthetic and respiratory equipment - Tracheal tubes and connectors - Amendment 1: Reinstatement of third e…

SIST EN ISO 10650:2026

Dentistry - Powered polymerization activators (ISO 10650:2026)