SIST ISO 6403:1998 PDF

Name: SIST ISO 6403:1998 — Hydraulic fluid power -- Valves controlling flow and pressure -- Test methods
SKU: SIST ISO 6403:1998
Price: 81.94 EUR
Availability: InStock

Hydraulic fluid power -- Valves controlling flow and pressure -- Test methods

Название (английский):

SIST ISO 6403:1998

Hydraulic fluid power -- Valves controlling flow and pressure -- Test methods

Статус документа:: Действующий
Формат:: Электронный (PDF)
Количество страниц:: 29
Дата публикации:: 1 декабря 1998 г.
ICS:: 23.100.50
Технический комитет:: IHPV - Hydraulics and pneumatics

Тип поставки:

Full version435 €Read online 24h10 €Read online 72h15 €

Язык документа:

ruen

Срок поставки:5 раб. дн. (перевод)

Цена:435 €

Описание (английский):

Specifies methods for testing valves which are used in a circuit in order to determine their steady-state and dynamic performance. Requirements for test installations and procedures, measurements and presentation of results are specified. Does not establish limits of performance. Accuracy of measurement is divided into three classes (A, B and B) which are explained in annex A. Guidance as to the use of practical units for the presentation of results is given in annex B.

Abstract

Похожие стандарты

Стандарты, упомянутые в описании

Overview

ISO 6403:1988 - "Hydraulic fluid power - Valves controlling flow and pressure - Test methods" defines standardized test methods for hydraulic valves used to control flow and pressure. The standard specifies test installations, procedures, measurements and presentation of results to determine steady‑state and dynamic performance. It does not set pass/fail performance limits; suitability for application is agreed between manufacturer and user. Measurement accuracy is classified (A, B, C) in Annex A and Annex B gives guidance on practical units.

Key topics and requirements

Scope: Methods for testing directional control, non‑return (check), pressure control (relief, reducing, unloading), flow control and flow‑dividing valves.

Test circuits: Prescribed basic circuits and permitted integrated test setups; pressure and temperature sensing points and piping/tapping requirements (locations and tapping diameters).

Steady‑state tests: Determination of pressure differential / flow characteristics (referencing ISO 4411) and steady‑state flow/pressure relations for various valve types.

Dynamic/transient tests: Switching envelope, transient response, and transient tests for pressure‑compensated and flow‑dividing valves.

Leakage and internal flow: Methods for measuring internal leakage and pilot/bleed conditions.

Proof and safety checks: Proof pressure test (e.g., application of 1.5× maximum operating pressure for integrity checks) before further testing.

Environmental and fluid control: Test fluid identification, viscosity, bulk modulus (if needed), temperature control, filtration/contamination level and sampling.

Measurement accuracy & reporting: Classes A/B/C of measurement accuracy (Annex A), detailed test report content and use of practical units (Annex B).

Applications and practical value

Design validation: R&D and design teams use ISO 6403 test methods to characterize valve steady‑state and dynamic behavior.

Quality and production testing: Test laboratories and manufacturers apply the standard for repeatable, comparable performance data during production or lot testing.

Procurement and acceptance: Buyers and system integrators request test reports generated to ISO 6403 procedures to verify valve performance claims.

Troubleshooting and maintenance: Maintenance engineers use standardized test methods to isolate valve issues (leakage, response time, switching thresholds).

Related standards

ISO 4411 - Determination of pressure differential/flow characteristics

ISO 5598 and ISO 1219 - Fluid power vocabulary and symbols

ISO 6404 - Electrohydraulic servovalves

IEC Publication 85 - (Referenced thermal/electrical considerations)

Keywords: ISO 6403:1988, hydraulic fluid power, valves controlling flow and pressure, valve test methods, pressure‑flow characteristics, proof pressure, measurement accuracy.

SIST ISO 6403:1998 PDF

Abstract

Похожие стандарты

Overview

Key topics and requirements

Applications and practical value

Who should use this standard

Related standards

Технические детали

ISO 6403:1988

Hydraulic fluid power — Valves controlling flow and pressure — Test methods

ISO 4411:1986

Hydraulic fluid power — Valves — Determination of pressure differential/flow characteristics

ISO 5598:1985

Fluid power systems and components — Vocabulary

BS ISO 1219-3:2016

Fluid power systems and components. Graphical symbols and circuit diagrams. Symbol modules and connected symb…

ISO 6404:1985

Hydraulic fluid power — Servovalves — Test methods