SIST ISO 6822:1996 PDF
Potatoes, root vegetables and round-headed cabbages -- Guide to storage in silos using forced ventilation
Potatoes, root vegetables and round-headed cabbages -- Guide to storage in silos using forced ventilation
- Статус документа:
- Действующий
- Формат:
- Электронный (PDF)
- Количество страниц:
- 4
- Дата публикации:
- 1 декабря 1996 г.
- ICS:
- 67.080.20
- Технический комитет:
- KŽP - Agricultural food products
The method provides for the use of a system of ventilation using outside air for regulation of the storage conditions of the products. It includes conditions of harvesting and putting into store, the preparation of the site and construction of silos, the system and technique of ventilation, loading and unloading of the products and checking of the conditions.
Abstract
Overview
SIST ISO 6822:1996 is an international standard that provides a comprehensive guide for the storage of potatoes, root vegetables, and round-headed cabbages in silos using forced ventilation. Developed by ISO Technical Committee ISO/TC 34, this standard establishes methods to regulate storage conditions by utilizing outside air ventilation systems. The primary goals are to reduce post-harvest losses, minimize labor during storage, and maintain the quality of agricultural products throughout storage periods.
This standard is particularly effective for moderate climate regions where harvest temperatures range from 0 to +2 °C or lower at night. It covers all key stages including harvesting, preparation of the storage site, ventilation system design and operation, loading/unloading techniques, and routine condition checks.
Key Topics
-
Storage Site Preparation and Silo Construction
- Select flat sites with minimal slope and underground water depth of 1.5 to 2 meters
- Ensure proximity to transport routes and electricity supply
- Use fixed or provisional silo constructions varying in dimensions based on regional needs (typically widths 3-5 m, heights 1.3-2 m, lengths 15-30 m)
- Opt for materials such as wood, sawdust, peat, straw, or modern insulating foams for covering silos
-
Forced Ventilation System
- Equip silos with inlet and outlet air channels connected to fixed or mobile fans controlled electrically or manually
- Airflow rates from 50 to 100 m³ per tonne per hour, adjusted for local climate conditions and product moisture levels
- Use underground brick, concrete, or wooden distribution channels or surface transportable tubes made from wood, tinplate, or polymeric materials
- Maintain air velocities of 3-6 m/s with pressures from 15 mm H₂O, increasing as needed for damp products
-
Harvesting and Storage Conditions
- Store well-formed, ripe, healthy, and frost-free vegetables grown under standardized agricultural conditions
- Harvest and store products to meet quality standards appropriate for human consumption, seed use, or fodder
- Load silos promptly to enable immediate ventilation and prevent air leaks
-
Ventilation Techniques
- Continuous drying using appropriately tempered outside air to prevent product damage
- Air cooling during cooler periods to maintain product temperatures at approximately:
- Round-headed cabbage: not less than -1 °C
- Root vegetables: not less than 0 °C
- Potatoes: not less than 2 °C
- Regulate and monitor fans and valves either automatically or manually
-
Monitoring and Maintenance
- Daily temperature measurements inside silos using thermometers or thermocouples
- Periodic airflow checks using anemometers to ensure uniform ventilation
- Monthly product condition analyses through bulk sampling methods
- Regular cleaning, drying, and disinfection of silos before storage season
- Inspection and repair of silo coverings, ventilation channels, electrical systems, and control equipment
Applications
SIST ISO 6822:1996 serves a vital role in optimizing the storage of perishable agricultural products to extend shelf life, reduce losses, and preserve quality. Key applications include:
-
Agricultural Storage Facilities Storage operators can design and manage silo-based storage systems for root crops using forced ventilation to maintain controlled atmospheres.
-
Post-Harvest Handling and Logistics The standard guides the integration of ventilation technology into harvesting workflows, improving the efficiency of loading, unloading, and temperature regulation.
-
Seed and Fodder Management The methodology supports storage conditions tailored for specialized storage requirements such as seed preservation or fodder stockpiling.
-
Climate-Adaptive Storage Solutions Particularly useful for regions with moderate climates, ISO 6822 aids in designing ventilation systems that adapt to daily and seasonal temperature fluctuations for optimal product conservation.
Related Standards
For comprehensive storage and post-harvest management of agricultural products, SIST ISO 6822:1996 should be considered alongside related international standards such as:
- ISO 677:1984 - Potatoes-Guide to storage in bulk using ventilation
- ISO 7301:1983 - Round cabbage classification and quality standards
- ISO 11220:1998 - Fruit and vegetables - Sampling for quality control
- ISO 13918:2017 - Ventilation systems for storage facilities-General requirements
These standards collectively ensure a harmonized approach to the quality assurance and preservation of root vegetables and related produce during storage and distribution.
Keywords: ISO 6822, potato storage, root vegetable storage, round-headed cabbage, silo ventilation, forced ventilation system, agricultural product storage, post-harvest losses, ventilation techniques, storage silos, temperature control in storage, agricultural standards.
Технические детали
- SKU
- SIST ISO 6822:1996
Похожие стандарты
Упомянутые в описании и другие стандарты SIST
ISO 13918:2017
ДействующийWelding — Studs and ceramic ferrules for arc stud welding
Overview ISO 13918:2017 - "Welding - Studs and ceramic ferrules for arc stud welding" defines requirements for studs and ceramic ferrules used in arc stud welding. The standard covers dimensions, mat…
SIST EN ISO 6338:2026
ДействующийMethod to calculate GHG emissions at LNG plant (ISO 6338:2023)
Overview SIST EN ISO 6338:2026 / ISO 6338:2023 establishes a standardized method for calculating greenhouse gas (GHG) emissions at liquefied natural gas (LNG) plants, both onshore and offshore. Devel…
SIST-TP CEN ISO/ASTM TR 52958:2026
Additive manufacturing of metals - Powder bed fusion (PBF) - In-situ coaxial photodiode monitoring for lack o…
Overview SIST-TP CEN ISO/ASTM TR 52958:2026 specifies a workflow for the detection of lack of fusion flaws during the additive manufacturing of metals using powder bed fusion-laser based (PBF-LB) pro…
SIST EN ISO 41002:2026
ДействующийFacility management - Development of the facility management organization (ISO 41002:2026)
Overview SIST EN ISO 41002:2026 - Facility management - Development of the facility management organization offers strategic guidance for building and developing robust facility management (FM) organ…
SIST EN ISO 844:2026
ДействующийRigid cellular plastics - Determination of compressive properties (ISO 844:2026)
Overview SIST EN ISO 844:2026 - Rigid Cellular Plastics: Determination of Compressive Properties (ISO 844:2026) provides standardized methods for measuring the compressive properties of rigid cellula…
SIST-TS CEN ISO/TS 17664-3:2026
ДействующийProcessing of health care products - Information to be provided by the medical device manufacturer for the pr…
Overview SIST-TS CEN ISO/TS 17664-3:2026 sets out comprehensive guidance for grouping reusable medical devices based on their cleaning requirements. This technical specification, prepared collaborati…
SIST EN ISO 8980-4:2026
ДействующийOphthalmic optics - Uncut finished spectacle lenses - Part 4: Specifications and test methods for the propert…
Overview SIST EN ISO 8980-4:2026 specifies requirements and test methods for the properties of anti-reflective coatings and hydrophobic coatings applied to uncut finished spectacle lenses. Developed…
SIST EN ISO 5361:2023/A1:2026
ДействующийAnaesthetic and respiratory equipment - Tracheal tubes and connectors - Amendment 1: Reinstatement of third e…
Overview SIST EN ISO 5361:2023/A1:2026 is an amendment to the internationally recognized ISO 5361:2023 standard, which specifies requirements for anaesthetic and respiratory equipment, with a focus o…