SIST ISO 7-1:1995 PDF

Name: SIST ISO 7-1:1995 — Pipe threads where pressure-tight joints are made on the threads -- Part 1: Dimensions, tolerances and designation
SKU: SIST ISO 7-1:1995
Price: 43.71 EUR
Availability: InStock

Pipe threads where pressure-tight joints are made on the threads -- Part 1: Dimensions, tolerances and designation

Название (английский):

SIST ISO 7-1:1995

Pipe threads where pressure-tight joints are made on the threads -- Part 1: Dimensions, tolerances and designation

Статус документа:: Действующий
Формат:: Электронный (PDF)
Количество страниц:: 7
Дата публикации:: 1 ноября 1995 г.
ICS:: 21.040.30
Технический комитет:: TLP - Pressure vessels

Тип поставки:

Full version105 €Read online 24h10 €Read online 72h15 €

Язык документа:

ruen

Срок поставки:2 раб. дн. (перевод)

Цена:105 €

Описание (английский):

Specified the designation and lays down the dimensions and tolerances of pipe threads. Gives terms and definition as well as symbols and explanations including examples of the complete designation for a thread. Figures 1 to 4 illustrate details. Tabulates thread dimensions from 1/16 up to and including 6 inch.

Abstract

Похожие стандарты

Стандарты, упомянутые в описании

Overview

ISO 7-1:1994 - Pipe threads where pressure‑tight joints are made on the threads (Part 1: Dimensions, tolerances and designation) specifies how pipe threads intended to form pressure‑tight joints on the threads are described and dimensioned. It defines thread forms (taper external, parallel internal, taper internal), terms and symbols, complete designation examples, and tabulates thread dimensions and tolerances for nominal sizes 1/16 up to and including 6 inch. The standard is the third edition (1994) prepared by ISO/TC 5 (ferrous metal pipes and fittings).

Key topics and technical requirements

Scope and thread types: Covers threads that achieve pressure‑tight joints by mating the threads - taper external (R), parallel internal (Rp) and taper internal (Rc).

Designation rules: Specifies the sequence and blocks for thread designation (e.g., description block: Rp / Rc / R; and the ISO reference block: ISO 7).

Dimensions and tolerances: Tabulates major, pitch and minor diameters, pitch (from threads per inch), gauge lengths, and tolerances for sizes 1/16″–6″. Values are presented in millimetres (converted from imperial basis).

Thread form terminology: Defines gauge plane, gauge length, complete/incomplete/washout threads, useful thread, fitting allowance and wrenching allowance - essential for correct mating and assembly.

Gauge and verification: States that plug and ring gauges used for verification shall conform to ISO 7-2 (verification by means of limit gauges) and details reference planes for gauging.

Assembly and limits: Addresses minimum useful thread lengths, internal threads with free run‑out, helix direction (right‑hand unless specified), and compatibility issues when combining with standard fastening threads.

Applications

Design and manufacture of threaded pipe fittings, valves and threaded pipe connections requiring pressure‑tight joints.

Production of tapers and parallel threaded components where dimensional tolerances and interchangeability are critical.

Inspection, gauging and quality control in plumbing, HVAC, petrochemical, oil & gas, and general industrial pipeline systems.

Technical reference for engineering drawings, product standards and procurement specifications.

Related standards

ISO 7-2 - Verification by means of limit gauges (complementary gauging requirements).

ISO 228-1 - Pipe threads where pressure‑tight joints are not made on the threads (related for non‑sealing thread types).

Keywords: ISO 7-1:1994, pipe threads, pipe fittings, pipe joints, dimensions, tolerances, designation, gauging, taper external thread, parallel internal thread.

SIST ISO 7-1:1995 PDF

Abstract

Похожие стандарты

Overview

Key topics and technical requirements

Applications

Who should use this standard

Related standards

Технические детали

ISO 7-1:1994

Pipe threads where pressure-tight joints are made on the threads — Part 1: Dimensions, tolerances and designa…

BS ISO 7819:2025

Lithium — Vocabulary

ISO 7251:2005/Amd 1:2023

Microbiology of food and animal feeding stuffs — Horizontal method for the detection and enumeration of presu…

BS ISO 22810:2010

Horology. Water-resistant watches.