SIST ISO 7373:2001 PDF

Name: SIST ISO 7373:2001 — Ferroalloys -- Experimental methods for checking the precision of sample division
SKU: SIST ISO 7373:2001
Price: 43.71 EUR
Availability: InStock

Ferroalloys -- Experimental methods for checking the precision of sample division

Название (английский):

SIST ISO 7373:2001

Ferroalloys -- Experimental methods for checking the precision of sample division

Статус документа:: Действующий
Формат:: Электронный (PDF)
Количество страниц:: 6
Дата публикации:: 1 ноября 2001 г.
ICS:: 77.100
Технический комитет:: IFEK - Ferrous metals

Тип поставки:

Full version90 €Read online 24h10 €Read online 72h15 €

Язык документа:

ruen

Срок поставки:1 раб. дн. (перевод)

Цена:90 €

Описание (английский):

The methods are carried out on the gross sample or sub-sample obtained from a ferroalloy consignment according to the methods prescribed in the relevant International Standard. The methods are applicable to the taking of increments of crushable ferroalloys but are not applicable to uncrushable ferroalloys of which increments are taken by boring.

Abstract

Похожие стандарты

Стандарты, упомянутые в описании

Overview

SIST ISO 7373:2001 specifies experimental methods for checking the precision of sample division for ferroalloys. The procedures apply to gross samples or sub-samples taken from a consignment according to the relevant ISO sampling standards. The methods are specifically applicable to crushable ferroalloys and are not intended for uncrushable ferroalloys where increments are taken by boring.

Key facts:

Experiments are repeated at least 10 times for each ferroalloy type.

Chemical analyses of experimental samples must follow the methods prescribed in the relevant ISO chemical analysis standards.

Minimum consignment masses are given to ensure sufficient gross sample: for ferroalloys covered by ISO 4552-1 the consignment should be at least 100 t, and for those covered by ISO 4552-2 at least 5 t.

Key Topics

Selection of experimental method: the standard distinguishes between methods of division in one or two stages and division in three or more stages. The choice depends on the physical properties of the ferroalloy and the practical crushing/division constraints.

Division stages and particle sizes: examples of whole-through sieve sizes by division stage are provided. Typical examples include:

Primary: -10 mm or -7.10 mm
Secondary: -5 mm or -2.80 mm
Tertiary: -1.0 mm or -250 µm
Recommended whole-through sieve sizes to be divided are -2.8 mm or -1.0 mm, depending on the method chosen.

Experimental design and data recording: one test sample is prepared from each divided sample. Chemical determinations are randomized (or analysed together in random order) and experimental data are recorded in a data log as exemplified in the standard.

Data analysis and precision assessment: the standard provides formulas and guidance for estimating the precision of chemical analysis and the precision of sample division. If a calculated variance term under a square-root sign is negative, the standard instructs that the standard deviation be regarded as zero provided no attributable experimental defects are observed.

Applications

Quality control of ferroalloy consignments through validated sampling procedures.

Laboratory verification of division apparatus and crushing methods to ensure representative test portions.

Demonstrating compliance with customer or regulatory requirements for sampling precision.

Practical benefits: improved sampling reliability, consistent test results, and clearer criteria for corrective action when measured precision does not meet the values referenced in the relevant ISO standards.

Related Standards

ISO 4552 (Sampling and sample preparation for ferroalloys)

ISO 7087 (Evaluation of quality variation and methods for checking sampling precision)

Relevant ISO chemical analysis methods cited in the standard for specific elements

For implementation, consult SIST ISO 7373:2001 alongside the referenced ISO sampling and analytical standards to ensure full procedural and analytical compliance.

SIST ISO 7373:2001 PDF

Abstract

Похожие стандарты

Overview

Key Topics

Applications

Related Standards

Технические детали

SIST ISO 4552-1:2000

Ferroalloys -- Sampling and sample preparation for chemical analysis -- Part 1: Ferrochromium, ferrosilicochr…

SIST ISO 4552-2:2000

Ferroalloys -- Sampling and sample preparation for chemical analysis -- Part 2: Ferrotitanium, ferromolybdenu…

SIST ISO 7087:2001

Ferroalloys -- Experimental methods for the evaluation of the quality variation and methods for checking the…