SIST ISO 789-11:1997 PDF

Overview

SIST ISO 789-11:1997 is an international standard issued by the International Organization for Standardization (ISO) that specifies test procedures for assessing the steering capability of agricultural wheeled tractors. This standard focuses specifically on tractors with two or more axles equipped with pneumatic tyres and covers both normal and emergency steering modes. It excludes track-type or skid-steered tractors.

The purpose of ISO 789-11 is to provide consistent and reliable methodologies for evaluating steering performance, ensuring tractors meet safety and operational efficiency requirements under various conditions. Developed by ISO Technical Committee ISO/TC 23, Subcommittee SC 2, this standard complements other parts of the ISO 789 series addressing agricultural tractor testing.

Key highlights:

• Targets wheeled agricultural tractors only
• Specifies apparatus, test areas, and measurement units
• Emphasizes real-world testing including energy source failure simulation
• Establishes criteria for steering effort and turning radius assessment

Key Topics

Test Scope and Applicability

• Applies to agricultural tractors with at least two axles and pneumatic tyres
• Excludes track-type or skid-steered tractors
• Covers both normal operation and emergency steering evaluation

Test Area and Conditions

• Test surface must be compacted or paved, dry, and flat (≤3% grade)
• Surface must allow clear markings and resist defacement by turning tractors
• Test area large enough to accommodate full turning maneuvers

Test Apparatus and Measurement

• Devices to accurately measure turning radius, steering effort, and elapsed time
• Measurement tolerances include ±0.2 seconds for time, ±0.5% for distance, and ±1% for force
• Steering effort defined as tangential force applied to steering wheel circumference

Tractor and Tyre Specifications

• Use tyres and wheel configurations producing highest steering load per manufacturer guidance
• Tyre pressures must be within recommended ranges for road driving at maximum design speed
• Tractor ballasted to maximum allowable mass, with ballast distribution maintaining proper steering characteristics

Test Procedure Summary

• Tractor driven in a spiral line at about 10 km/h from straight position
• Steering effort measured while initiating turn to achieve a 12-meter radius
• Tests performed turning left and right, with and without simulated energy source failure (e.g., power steering loss)
• Results recorded include steering effort, time to reach turning radius, and relevant tractor setup details

Reporting

• Detailed test report required with manufacturer info, tractor model, mass distribution, tyre data, steering system type, and test results
• Annex A provides specimen test report format for consistency

Applications

SIST ISO 789-11:1997 is essential for manufacturers, testing bodies, and regulatory agencies involved in agricultural tractor design, safety certification, and performance validation. Practical applications include:

• Steering system validation: Ensures tractor steering systems meet functional and safety requirements under normal and failure conditions.
• Product development: Guides engineers in optimizing steering components such as hydraulic, manual, or assisted steering mechanisms.
• Regulatory compliance: Supports compliance with national and international regulations governing agricultural machinery safety.
• Quality control: Provides standardized test methods for consistency in steering performance across models and production batches.
• Operator safety: Helps evaluate emergency steering capability to reduce accident risks in critical conditions.

Related Standards

ISO 789-11 is part of a comprehensive series of standards under ISO 789 covering various aspects of agricultural tractor testing:

• ISO 789-1: Power tests for power take-off (PTO)
• ISO 789-3: Turning and clearance diameters
• ISO 789-9: Power tests for drawbar towing
• ISO 10998: Agricultural wheeled tractors - Steering requirements (referenced for normative definitions)

Additionally, close coordination with electrotechnical standards by the International Electrotechnical Commission (IEC) ensures integrated requirements where electromechanical steering assist systems are involved.

---

Keywords: ISO 789-11, agricultural tractors, steering capability, wheeled tractors, test procedures, steering effort, turning radius, tractor safety testing, pneumatic tyres, emergency steering, agricultural machinery standards.