SIST ISO 9192:1995 PDF

Name: SIST ISO 9192:1995 — Lawn and garden ride-on (riding) tractors -- One-point tubular sleeve hitch
SKU: SIST ISO 9192:1995
Price: 43.71 EUR
Availability: InStock

Lawn and garden ride-on (riding) tractors -- One-point tubular sleeve hitch

Название (английский):

SIST ISO 9192:1995

Lawn and garden ride-on (riding) tractors -- One-point tubular sleeve hitch

Статус документа:: Действующий
Формат:: Электронный (PDF)
Количество страниц:: 7
Дата публикации:: 1 сентября 1995 г.
ICS:: 65.060.70
Технический комитет:: IMKG - Machinery for agriculture and forestry

Тип поставки:

Full version105 €Read online 24h10 €Read online 72h15 €

Язык документа:

ruen

Срок поставки:2 раб. дн. (перевод)

Цена:105 €

Описание (английский):

Specifies the requirements for the connection of implements or attachments to the rear of lawn and garden ride-on tractors by means of a one-point hitch in association with a manual or power lift system. Standard dimensions for hitch point location, hitch tube and implement yoke are laid down to ensure the connection of specific implements or attachments. Applies to lawn and garden tractors as defined in ISO 9192.

Abstract

Похожие стандарты

Стандарты, упомянутые в описании

Overview

ISO 9192:1991 specifies the requirements for a one‑point tubular sleeve hitch used to attach implements and accessories to the rear of lawn and garden ride‑on (riding) tractors. The standard defines dimensional interfaces and performance requirements so implements fitted with a tubular yoke and the tractor hitch will mate reliably when used with a manual or power lift system. ISO 9192 helps ensure interchangeability, safety and predictable behavior across tractor and implement designs.

Key topics and technical requirements

Scope: Connection of implements/attachments to rear of lawn and garden ride‑on tractors by a single‑pin tubular sleeve hitch, used with manual or hydraulic lift systems.

Dimensional interfaces: Standardized locations and sizes for the hitch point, hitch tube and implement yoke to guarantee fit and alignment. Example dimensions given in the standard include:

Hitch point height from ground: 180–230 mm (200 mm recommended)
Pin (hitch pin) diameter: 15–16 mm
Hitch tube inner diameter: 17–18 mm
Hitch tube outer diameter: ≈25 mm (as shown in the dimensional table)
Clearances such as 75 mm distance between connection point and tyre and horizontal offset values (e.g., ~250 mm forward from rear axle)
Implement yoke features: straight portion lengths, two aligned holes (≈18 mm), and stabilizer nut specifications (Note: the standard contains the complete dimensional tables and tolerances; the figures above are examples extracted from the published tables.)

Performance requirements:

Minimum available lift force at the implement hitch: 1.8 kN
Recommended maximum manual effort on the lift handle: ≤ 180 N

Accessories and safety: Use of stabilizer nuts, locking devices (e.g., counter‑nuts), and methods for achieving correct implement pitch (aplomb) through lift link adjustment or implement-mounted regulators.

Applications and who uses this standard

Tractor manufacturers designing rear hitch assemblies for lawn and garden ride‑on tractors.

Implement and accessory manufacturers (e.g., sweeper, aerator, tow‑type attachments) that need to guarantee mechanical compatibility.

Aftermarket suppliers, safety engineers, test labs and compliance officers responsible for conformity, interchangeability and safe operation.

Dealers and repair workshops that fit or advise on compatible attachments and recommended setup/ballast for stability.

Related standards

ISO 5395:1990 - Lawn mowers and related definitions and safety

ISO 9190:1990 - Tractor drawbar specifications

ISO 9191:1991 - Three‑point hitches for lawn and garden tractors (definitions and test methods)

ISO 9193:1990 - Power take‑off (PTO) for ride‑on lawn and garden tractors

ISO 9192:1991 is essential when designing, specifying or certifying hitch interfaces for small ride‑on tractors to ensure safe, interchangeable and standardized implement connections.

SIST ISO 9192:1995 PDF

Abstract

Похожие стандарты

Overview

Key topics and technical requirements

Applications and who uses this standard

Related standards

Технические детали

ISO 9192:1991

Lawn and garden ride-on (riding) tractors — One-point tubular sleeve hitch

ISO 5395:1990

Power lawn-mowers, lawn tractors, lawn and garden tractors, professional mowers, and lawn and garden tractors…

ISO 9190:1990

Lawn and garden ride-on (riding) tractors — Drawbar

ISO 9191:1991

Lawn and garden ride-on (riding) tractors — Three-point hitch

ISO 9193:1990

Lawn and garden ride-on (riding) tractors — Power take-off