SIST ISO 9589:1996 PDF

Name: SIST ISO 9589:1996 — Escalators -- Building dimensions
SKU: SIST ISO 9589:1996
Price: 31.42 EUR
Availability: InStock

Escalators -- Building dimensions

Название (английский):

SIST ISO 9589:1996

Escalators -- Building dimensions

Статус документа:: Действующий
Формат:: Электронный (PDF)
Количество страниц:: 3
Дата публикации:: 1 августа 1996 г.
ICS:: 91.140.90
Технический комитет:: DTN - Lift and transport appliances

Тип поставки:

Full version45 €Read online 24h10 €Read online 72h15 €

Язык документа:

ruen

Срок поставки:1 раб. дн. (перевод)

Цена:45 €

Описание (английский):

Specifies the building dimensions for the space needed to install escalators with a maximum nominal speed of 0,5 m/s, an inclination angle of 30° or 35° and a rise from 2 m to 6 m. The machine room is a part of the truss. Does not apply to certain escalators which are subject to special operational conditions; special designs like spiral escalators, combinations of escalators and passenger conveyors etc.

Abstract

Похожие стандарты

Упомянутые в описании и другие стандарты SIST

Overview

ISO 9589:1994 - Escalators - Building dimensions defines the spatial requirements for installing conventional escalators. The standard applies to escalators with a maximum nominal speed of 0.5 m/s, inclination angles of 30° or 35°, and a rise between 2 m and 6 m. It treats the machine room as part of the truss and provides the dimensional information needed to plan shafts, pits and headroom for standard escalator installations. The standard was prepared by Technical Committee ISO/TC 178 (Lifts, escalators, passenger conveyors).

Key topics and requirements

Scope limits: excludes escalators under special operational conditions (e.g., some public-traffic systems) and special designs such as spiral escalators or escalator–conveyor combinations.

Applicable parameters: nominal speed (0.5 m/s), inclination (30° or 35°), and rise (2–6 m). Note: 35° installations may be restricted by national regulations.

Dimensional tables: provides tabulated values for overall space (L + U and P) and well cut-out dimensions based on nominal step width.

Well cut-out examples (dimensions in millimetres, as given in the standard):

Nominal step width 600 mm → well cut-out approx. 1270 / 1240 mm
Nominal step width 800 mm → well cut-out approx. 1470 / 1440 mm
Nominal step width 1000 mm → well cut-out approx. 1670 / 1640 mm (Standard notes that cut-out may be increased to meet ceiling-guard requirements in national regulations.)

Key dimensional items illustrated: horizontal projection (L), lower and upper landings (N, U), distance between supports (M1), well cut-out (M2), pit dimension (P), floor height/rise (H) and nominal step width (z).

Site surroundings: installation surroundings should conform to applicable national requirements.

Applications and users

ISO 9589:1994 is intended for professionals involved in the planning, design and installation of escalators:

Architects and building designers sizing shafts and public spaces

Lift/escalator manufacturers and installers for pre-installation dimensional checks

Building services and structural engineers integrating escalators into trusses and machine rooms

Project managers and planners for shopping centres, transit hubs and commercial buildings

Regulatory and safety authorities as a reference for minimum space expectations (subject to national variations)

Related standards

Prepared by ISO/TC 178, consult other standards from this committee for complementary requirements on lifts, escalators and passenger conveyors and for safety or performance specifications.

Keywords: ISO 9589, escalators building dimensions, escalator installation, well cut-out, step width, machine room, escalator inclination, rise, escalator design.

SIST ISO 9589:1996 PDF

Abstract

Похожие стандарты

Overview

Key topics and requirements

Applications and users

Related standards

Технические детали

ISO 9589:1994

Escalators — Building dimensions

SIST EN ISO 6338:2026

Method to calculate GHG emissions at LNG plant (ISO 6338:2023)

SIST-TP CEN ISO/ASTM TR 52958:2026

Additive manufacturing of metals - Powder bed fusion (PBF) - In-situ coaxial photodiode monitoring for lack o…

SIST EN ISO 41002:2026

Facility management - Development of the facility management organization (ISO 41002:2026)

SIST EN ISO 844:2026

Rigid cellular plastics - Determination of compressive properties (ISO 844:2026)

SIST-TS CEN ISO/TS 17664-3:2026

Processing of health care products - Information to be provided by the medical device manufacturer for the pr…

SIST EN ISO 8980-4:2026

Ophthalmic optics - Uncut finished spectacle lenses - Part 4: Specifications and test methods for the propert…

SIST EN ISO 5361:2023/A1:2026

Anaesthetic and respiratory equipment - Tracheal tubes and connectors - Amendment 1: Reinstatement of third e…