BS EN IEC 60034-12:2024
Rotating electrical machines - Starting performance of single-speed three-phase cage induction motors
Rotating electrical machines - Starting performance of single-speed three-phase cage induction motors
- Статус документа:
- Действующий
- Формат:
- Электронный (PDF)
- Дата публикации:
- 30 ноября 2024 г.
- ICS:
- 29.160.01
- Технический комитет:
- CENELEC
- SKU:
- BS EN IEC 60034-12:2024
Abstract
1 Scope This part of IEC 60034 specifies the parameters for eight designs of starting performance of single-speed three-phase 50 Hz or 60 Hz cage induction motors in accordance with IEC 60034‑1 that:
have a rated voltage up to 1 000 V;
are intended for direct-on-line or star-delta starting;
are rated on the basis of duty type S1;
are constructed to any degree of protection as defined in IEC 60034‑5 and explosion protection.
This document also applies to dual voltage motors provided that the flux saturation level is the same for both voltages. The values of torque, apparent power and current given in this document are limiting values (that is, minimum or maximum without tolerance). NOTE 1 It is not expected that all manufacturers will produce machines for all eight designs. The selection of any specific design in accordance with this document will be a matter ...
Похожие стандарты
Упомянутые в описании и другие стандарты BS
IEC 60034-15:2025
ДействующийRotating electrical machines - Part 15: Impulse voltage withstand levels of form-wound stator coils for rotat…
Overview IEC 60034-15:2025 (Rotating electrical machines - Part 15: Impulse voltage withstand levels of form-wound stator coils for rotating a.c. machines) specifies the impulse voltage withstand req…
IEC 60034-5:2020
ДействующийRotating electrical machines - Part 5: Degrees of protection provided by the integral design of rotating elec…
Overview IEC 60034-5:2020 defines the IP code (degrees of protection) specifically for rotating electrical machines. It provides the classification, designation and test requirements for enclosures o…
BS ISO 10835:2007
ДействующийDirect reduced iron and hot briquetted iron. Sampling and sample preparation.
1 Scope This International Standard gives a) the underlying theory, b) the basic principles for sampling and preparation of samples , and c) the basic requirements for the design, installation and op…