BS EN ISO 7093-2:2000
Plain washers. Large series - Product grade C
Plain washers. Large series - Product grade C
- Статус документа:
- Действующий
- Формат:
- Электронный (PDF)
- Дата публикации:
- 30 июня 2021 г.
- ICS:
- 21.060.30
- Технический комитет:
- CEN
- SKU:
- BS EN ISO 7093-2:2000
Abstract
1 Scope This part of ISO 7093 specifies the characteristics of large-series, product-grade-C plain washers in the 100 HV hardness class, of nominal sizes (nominal thread diameters) ranging from 3 mm to 36 mm inclusive. Washers conforming to this part of ISO 7093 are intended for use in cases where soft material pieces are to be clamped or where there are large clearance holes in the workpiece. Nevertheless, in the latter case, the suitability of the washer thickness should be checked. Washers of hardness class 100 HV are suitable for:
— hexagon bolts and screws of product grade C in property classes up to and including 6.8;
— hexagon nuts of product grade C in property classes up to and including 6;
— case-hardened thread rolling screws.
If dimensions other than those listed in this part of [ISO 7093](/search?q=ISO%C2%A07093) are required, they should be selected from those given in [ISO 887](/search?q=ISO%C2%A0887).
Похожие стандарты
Упомянутые в описании и другие стандарты BS
ISO 7093-1:2000
ДействующийPlain washers — Large series — Part 1: Product grade A
Overview ISO 7093-1:2000 defines the requirements for plain washers - large series - product Grade A. The standard specifies dimensional ranges, material and hardness classes, surface finish consider…
ISO 8871-4:2006
ДействующийElastomeric parts for parenterals and for devices for pharmaceutical use — Part 4: Biological requirements an…
Overview ISO 8871-4:2006 - "Elastomeric parts for parenterals and for devices for pharmaceutical use - Part 4: Biological requirements and test methods" defines the biological safety requirements and…
BS ISO 10835:2007
ДействующийDirect reduced iron and hot briquetted iron. Sampling and sample preparation.
1 Scope This International Standard gives a) the underlying theory, b) the basic principles for sampling and preparation of samples , and c) the basic requirements for the design, installation and op…