BS ISO 6751:2011
Tools for moulding. Ejector pins with cylindrical head
Tools for moulding. Ejector pins with cylindrical head
- Статус документа:
- Действующий
- Формат:
- Электронный (PDF)
- Дата публикации:
- 30 сентября 2011 г.
- ICS:
- 25.120.30
- SKU:
- BS ISO 6751:2011
Abstract
1 Scope This International Standard specifies the dimensions and tolerances, in millimetres, of ejector pins with cylindrical head which are used in compression and injection moulds and in die casting dies. It also gives material guidelines and hardness requirements, and specifies the designation of ejector pins with cylindrical head. Flat ejector pins are specified in ISO 8693 and shouldered ejector pins are specified in ISO 8694.
Похожие стандарты
Упомянутые в описании и другие стандарты BS
ISO 8693:2011
ДействующийTools for moulding — Flat ejector pins
Overview ISO 8693:2011 - Tools for moulding - Flat ejector pins describes standardized dimensions, tolerances, materials and hardness for flat ejector pins used in compression and injection moulds an…
ISO 8694:2011
ДействующийTools for moulding — Shouldered ejector pins
Overview ISO 8694:2011 specifies the dimensional, material and marking requirements for shouldered ejector pins with a cylindrical head used in compression and injection moulds and in die-casting die…
BS ISO 10835:2007
ДействующийDirect reduced iron and hot briquetted iron. Sampling and sample preparation.
1 Scope This International Standard gives a) the underlying theory, b) the basic principles for sampling and preparation of samples , and c) the basic requirements for the design, installation and op…