BS ISO 6953-1:2015
Pneumatic fluid power. Compressed air pressure regulators and filter-regulators - Main characteristics to be included in literature from suppliers and product-marking requirements
Pneumatic fluid power. Compressed air pressure regulators and filter-regulators - Main characteristics to be included in literature from suppliers and product-marking requirements
- Статус документа:
- Отменён
- Формат:
- Электронный (PDF)
- Дата публикации:
- 31 марта 2015 г.
- ICS:
- 23.100.50
- SKU:
- BS ISO 6953-1:2015
Abstract
1 Scope This part of ISO 6953 specifies which characteristics of compressed air pressure regulators are to be included in literature from their suppliers. It also applies to filter-regulators . This part of ISO 6953 applies to
— manually controlled direct operated types (with or without relieving mechanism),
— manually controlled internal pilot operating types (e.g. nozzle flapper), and
— external pilot operated types.
In addition, it specifies the product marking requirements for pressure regulators and filter-regulators . This part of ISO 6953 is applicable to compressed air pressure regulators with a rated inlet pressure of up to 2 500 kPa (25 bar) and an outlet adjustment pressure of up to 1 600 kPa (16 bar); and to filter-regulators with rated inlet and outlet pressures of up to 1 600 kPa (16 bar), in which the major contaminants are removed by mechanical means.
NOTE 1 1 bar = 0,1 MPa = 10 5 Pa; 1 MPa = 1 N/mm 2 .
The rated pressure should be selected from the preferred pressures listed in ISO 2944.
NOTE 2 T...
Похожие стандарты
Упомянутые в описании и другие стандарты BS
ISO 6953-2:2024
ДействующийPneumatic fluid power — Compressed air pressure regulators and filter-regulators — Part 2: Test methods to de…
Overview ISO 6953-2:2024 - "Pneumatic fluid power - Compressed air pressure regulators and filter-regulators - Part 2" specifies standardized test methods and a presentation format for the main chara…
BS ISO 2944:2000
ДействующийFluid power systems and components. Nominal pressures.
BS ISO 10835:2007
ДействующийDirect reduced iron and hot briquetted iron. Sampling and sample preparation.
1 Scope This International Standard gives a) the underlying theory, b) the basic principles for sampling and preparation of samples , and c) the basic requirements for the design, installation and op…