BS ISO 815-2:2014
Rubber, vulcanized or thermoplastic. Determination of compression set - At low temperatures
Rubber, vulcanized or thermoplastic. Determination of compression set - At low temperatures
- Статус документа:
- Отменён
- Формат:
- Электронный (PDF)
- Дата публикации:
- 30 ноября 2014 г.
- ICS:
- 83.060
- SKU:
- BS ISO 815-2:2014
Abstract
1 Scope This part of ISO 815 specifies two methods for the determination of the compression set characteristics of vulcanized and thermoplastic rubbers at low temperatures. Method 1 derives from the methodology used in ISO 815-1. Method 2 uses a specified testing device, allowing to measure and record the test piece thickness during recovery. Due to the load applied during recovery in method 2, no correlation can be established between the results given by both methods.
NOTE When rubber is held under compression, physical or chemical changes can occur that prevent the rubber returning to its original dimensions after release of the deforming force. The result is a set, where the magnitude of which depends on the time and temperature of compression as well as on the time, temperature, and conditions of recovery. At low temperatures, changes resulting from the effects of glass hardening or crystallization become predominant and, since these effects are reversed by raising the temperature, it is necessary for all measurements to be undertaken at the test temperature.
Похожие стандарты
Упомянутые в описании и другие стандарты BS
ISO 8157:2022
ДействующийFertilizers, soil conditioners and beneficial substances — Vocabulary
Overview ISO 8157:2022 is an international standard published by the International Organization for Standardization (ISO) that provides a comprehensive vocabulary for fertilizers, soil conditioners,…
ISO 815-1:2019
ДействующийRubber, vulcanized or thermoplastic — Determination of compression set — Part 1: At ambient or elevated tempe…
Overview ISO 815-1:2019 - Rubber, vulcanized or thermoplastic - Determination of compression set - Part 1: At ambient or elevated temperatures defines standardized laboratory methods for measuring co…
BS ISO 10835:2007
ДействующийDirect reduced iron and hot briquetted iron. Sampling and sample preparation.
1 Scope This International Standard gives a) the underlying theory, b) the basic principles for sampling and preparation of samples , and c) the basic requirements for the design, installation and op…