IEC 60884-2-7:2025
Plugs and socket-outlets for household and similar purposes - Part 2-7: Particular requirements for cord extension sets
Plugs and socket-outlets for household and similar purposes - Part 2-7: Particular requirements for cord extension sets
- Статус документа:
- Действующий
- Формат:
- Электронный (PDF)
- Количество страниц:
- 19
- Дата публикации:
- 21 февраля 2025 г.
- Издание:
- IEC IS 60884 edition 2 version 1
- ICS:
- 29.120.30
IEC 60884-2-7:2025 applies to cord extension sets, rewirable and non-rewirable, with or without earthing contact, with a rated voltage greater than 50 V but not exceeding 440 V and a rated current not exceeding 16 A, intended for household and similar purposes, either indoors or outdoors. This document does not apply to cord extension sets with means for reeling. Cord extension sets intended to be used as socket-outlets for furniture are additionally covered by IEC 60884‑2‑8. This document also applies to cord extension sets which are intended to be used in a cable reel, and which therefore become cable reels with a detachable flexible cable. For the combination of the cord extension set, the reel requirements and tests of IEC 61242 apply in addition. Cord extension sets are suitable for use at ambient temperatures not normally exceeding +40 °C, but their average temperature over a period of 24 h does not exceed +35 °C, with a lower limit of the ambient air temperature of −5 °C. This second edition cancels and replaces the first edition published in 2011, and Amendment 1:2013. This edition constitutes a technical revision. This edition includes the following significant technical changes with respect to the previous edition: a) alignment to IEC 60884-1, fourth edition.
Abstract
Overview
IEC 60884-2-7:2025 - "Plugs and socket-outlets for household and similar purposes - Part 2-7: Particular requirements for cord extension sets" specifies safety and construction requirements for cord extension sets (rewirable and non-rewirable), with or without earthing, rated >50 V up to 440 V and ≤16 A. It covers sets intended for household and similar use, indoors or outdoors, and includes cord extension sets intended to be used in a cable reel (in which case IEC 61242 requirements also apply). This second edition is a technical revision aligned to IEC 60884‑1 (fourth edition).
Key Topics
This standard supplements IEC 60884‑1 and addresses cord extension set–specific requirements, including:
- Scope and ratings: voltage and current limits, ambient temperature suitability (+40 °C normal; 24 h average ≤ +35 °C; lower limit −5 °C).
- Construction and materials: plugs, portable and fixed socket‑outlets, terminals and terminations, earthing provisions.
- Safety tests and performance: protection against electric shock, insulation resistance, electric strength, temperature rise, resistance to heat, mechanical strength, and resistance to humidity.
- Electrical characteristics: breaking capacity, normal operation, force to withdraw the plug, and connection of flexible cables.
- Marking and classification: required markings, product classification and ratings.
- Special requirements and annexes: EMC/EMF considerations, ageing, switches in portable socket‑outlets, crimped and insulation‑piercing terminals, and low‑temperature service (down to −45 °C) or high‑load applications where applicable.
- Interface with cable reels: cord sets intended for inclusion in a reel must meet IEC 61242 reel requirements in addition to this standard.
Applications
IEC 60884-2-7:2025 is essential for:
- Manufacturers designing and producing cord extension sets for household, garden, or similar domestic applications.
- Product designers and engineers specifying rewirable or non‑rewirable extension leads, with or without earthing.
- Test laboratories and conformity assessment bodies performing type and routine tests referenced in the standard.
- Purchasing, safety and compliance teams ensuring products meet international safety, marking and performance requirements.
- Regulatory authorities and market surveillance bodies evaluating safety for indoor/outdoor cord extension use.
Related Standards
- IEC 60884‑1:2022 - General requirements for plugs and socket‑outlets (reference and alignment).
- IEC 60884‑2‑8 - Socket‑outlets for furniture (when extension sets are used as furniture outlets).
- IEC 61242 - Cable reels for household and similar purposes (applies when cord extension sets form part of a reel).
Keywords: IEC 60884-2-7:2025, cord extension sets, plugs and socket-outlets, household, cable reel, earthing, rewirable, product safety, IEC standards.
Технические детали
- Технический комитет
- SC 23B - Plugs, socket-outlets and switches
- SKU
- IEC 60884-2-7:2025
Похожие стандарты
Упомянутые в описании и другие стандарты IEC
IEC 60884-1:2022
ДействующийPlugs and socket-outlets for household and similar purposes - Part 1: General requirements
Overview - IEC 60884-1:2022 (Plugs and socket‑outlets - General requirements) IEC 60884-1:2022 is the fourth edition of the international standard that sets general safety and performance requirement…
IEC 60884-2-8:2025
ДействующийPlugs and socket-outlets for household and similar purposes - Part 2-8: Particular requirements for socket-ou…
Overview IEC 60884-2-8:2025 - Plugs and socket-outlets for household and similar purposes, Part 2-8 - defines particular requirements for socket-outlets for furniture. It applies to AC socket-outlets…
IEC 62590-2-2:2026
ДействующийRailway applications - Electronic power converters for fixed installations - Part 2-2: DC Traction applicatio…
Overview IEC 62590-2-2:2026 is an international standard developed by the International Electrotechnical Commission (IEC) focusing on railway applications, specifically the electronic power converter…
IEC 61753-042-02:2026
ДействующийFibre optic interconnecting devices and passive components - Performance standard - Part 042-02: Plug-pigtail…
Overview IEC 61753-042-02:2026 establishes the minimum performance, test, and measurement requirements for plug-pigtail and plug-receptacle style OTDR (Optical Time-Domain Reflectometer) reflecting d…
IEC 61837-2:2018
ДействующийSurface mounted piezoelectric devices for frequency control and selection - Standard outlines and terminal le…
Overview IEC 61837-2:2018 - Surface mounted piezoelectric devices for frequency control and selection - Standard outlines and terminal lead connections - Part 2: Ceramic enclosures (Edition 3.0, 2018…
IEC 61851-23-1:2026
ДействующийElectric vehicle conductive charging system - Part 23-1: DC electric vehicle supply equipment - Automated con…
Overview IEC 61851-23-1:2026 is an international standard published by the International Electrotechnical Commission (IEC) that specifies requirements for DC electric vehicle supply equipment (EVSE)…
IEC 63506:2026
ДействующийCalibration of the prompt fission neutron logging tools
Overview IEC 63506:2026 - Calibration of the Prompt Fission Neutron Logging Tools is the international standard that specifies the calibration methods for prompt fission neutron (PFN) logging tools,…
IEC 63589-1:2026
ДействующийLinear accelerator - Electron linear accelerator for radiation processing - Part 1: General requirements and…
Overview IEC 63589-1:2026 specifies the general requirements and test methods for electron linear accelerator devices used in radiation processing. Developed by the International Electrotechnical Com…