ISO 10983:2014

Overview

ISO 10983:2014 - Timber - Finger joints - Minimum production requirements and testing methods defines minimum production, quality-control and testing requirements for bonded finger joints used in structural wood products such as glued laminated timber (glulam), cross-laminated timber (CLT) and finger-jointed timber. The standard covers both softwoods and hardwoods where bonding information exists, but excludes impressed (die‑formed) joints and large finger joints in glulam. It requires documented production procedures, traceability and routine testing to ensure durable, reliable bonded end joints.

Key topics and technical requirements

• Scope and applicability
  • Applies to bonded machined finger joints in individual laminations and finger‑jointed members; excludes die‑formed joints and large glulam finger joints.
• Production requirements
  • Production environment: cleanliness, controlled temperature and humidity.
  • Quality manual: must document organizational structure, timber and adhesive specifications, each production step, inspections and testing frequency.
  • Timber grading: limits for knots, grain deviations and other defects at joint ends; species may be grouped when similar bonding properties apply.
  • Moisture and temperature: timber at joint must meet adhesive manufacturer’s ranges; moisture measured with calibrated meter.
  • Adhesive controls: compatibility and compliance with ISO 20152‑1; follow manufacturer instructions for mixing, application, open/closed times and curing.
  • Processing: complete adhesive coverage of finger surfaces, assemble within 24 hours after machining, adequate end pressure until cure.
• Quality control & factory production control
  • Calibrated inspection/test equipment; defined responsibilities and records; regular management review of the quality system.
• Testing requirements
  • Qualification testing (e.g., initial or after major line changes): establish characteristic strengths and target strengths. Minimum sample size: 30 specimens.
  • Compliance testing: ongoing verification for each production batch; tests may be in bending or tension (Annex A and B). The same configuration must be used for qualification and compliance testing.
  • Partially‑cured testing is permitted only where a consistent relationship to fully‑cured strength is established and re‑verified (monthly or better).
  • Mandatory recording of production and test data for traceability (dates, species, adhesive type, dimensions, failure mode, etc.).

Practical applications and users

ISO 10983 is intended for:

• Timber manufacturers producing finger‑jointed lumber, glulam laminations or CLT laminations
• Quality managers and production engineers implementing factory production control
• Test laboratories and accreditation bodies performing qualification and compliance testing
• Specifiers, structural engineers and regulators who require documented finger joint performance and traceability

Using ISO 10983 helps ensure consistent finger‑joint quality, reliable adhesive bonding, and documented evidence required for structural timber applications.

Related standards

• ISO 20152‑1 - Timber structures - Bond performance of adhesives - Basic requirements (normative reference for adhesive performance).