ISO 17095:2013

Overview

ISO 17095:2013 specifies a standardized test method for determining the interfacial bond strength of fine (advanced) ceramics when joined to ceramics, metals, or glass and tested at elevated temperatures. The standard uses compression testing of a cross-bonded test piece to generate tensile or shear stresses at the interface. It covers test-piece preparation, apparatus and fixture requirements, test modes and rates, data acquisition, result calculation and reporting. Primary materials in scope include monolithic fine ceramics and ceramic composites (whisker-, fibre- or particulate-reinforced).

Key Topics and Requirements

• Test principle: A cross-bonded sample (two rectangular bars joined at 90° ± 1°) is compressed to induce tensile or shear failure at the bonded interface; bond strength is calculated from fracture load and bonded area.
• Test specimen prep: Dimensions, perpendicular alignment and bonded-area measurement procedures are specified to ensure repeatability.
• Apparatus:
  • Test machine: uniform crosshead speed; force accuracy per ISO 7500‑1 (class 1; ≈1% accuracy).
  • Heating/furnace: maintain test temperature stability to ±2 °C and uniformity such that temperature variation ≤10 °C after a 15‑min hold. Environment options include air, inert gas or vacuum.
  • Temperature measurement: thermocouples per IEC 60584‑1; low thermal inertia (wire diameter ≤0.5 mm recommended); resolution ≥1 °C and appropriate accuracy.
  • Data acquisition: autographic record of load vs. displacement with minimum 10 Hz sampling (50 Hz recommended response).
  • Dimensional measurement: instruments with 0.01 mm resolution (ISO 3611 referenced).
  • Fixtures: pressure head designs (arc-shaped or central ball) and bearing tolerances to avoid asymmetric stresses; recommended pressure-head width matching specimen width.
• Test modes & rates: Options for load rate or displacement rate; typically constant crosshead displacement at elevated temperature.
• Calculations & reporting: Procedures to compute tensile and shear bond strengths, mean values, and standard deviations; detailed test-report content is defined.

Applications

• Materials research and development for advanced ceramics and ceramic composites.
• Product and process qualification for ceramic-to-ceramic, ceramic-to-metal and ceramic-to-glass joints used in high-temperature components.
• Quality control and design-data generation in industries such as aerospace, energy, electronics, and automotive where ceramic bonding at elevated temperature is critical.
• Test laboratories, R&D centers, ceramic manufacturers and materials engineers.

Related Standards

• ISO 7500-1 - Verification of uniaxial testing machines (force calibration)
• IEC 60584-1 - Thermocouples (reference tables)
• ISO 3611 - Micrometers for external measurements

Keywords: ISO 17095:2013, fine ceramics, interfacial bond strength, elevated temperatures, cross-bonded test, tensile bond strength, shear bond strength, ceramic testing.