ISO 1742:1980
Glucose syrups — Determination of dry matter — Vacuum oven method
Glucose syrups — Determination of dry matter — Vacuum oven method
- Статус документа:
- Действующий
- Формат:
- Электронный (PDF)
- Количество страниц:
- 2
- Дата публикации:
- 1 августа 1980 г.
- Издание:
- ISO IS 1742 edition 1 version 1
- ICS:
- 67.180.20
The method consists in drying of a test portion, diluted with water and mixed with kieselguhr at 70 °C and at a pressure not exceeding 34 mbar. It is applicable to syrups irrespective of their method of production, also to dried syrup, starch sugar and syrup containing fructose.
Abstract
Overview
ISO 1742:1980 specifies a vacuum oven method for the determination of dry matter in glucose syrups. The procedure applies regardless of syrup production method and is explicitly applicable to dried glucose syrup, solid glucose (starch sugar) and glucose syrups containing fructose (including isoglucose). The method uses a test portion mixed with kieselguhr (diatomaceous earth) and dried under reduced pressure at controlled temperature to produce reproducible dry-matter measurements useful for quality control and specification compliance.
Key Topics
- Principle: Dry a diluted test portion mixed with kieselguhr in a vacuum oven at 70 °C and pressure ≤ 34 mbar until constant mass is achieved.
- Sample preparation:
- Mix the laboratory sample well and weigh an 8–10 g test portion into a 100 ml beaker.
- Dilute with warm water and transfer quantitatively to a weighed drying dish containing ~30 g dried kieselguhr.
- Kieselguhr should be washed (acid then water), air-dried and oven-dried at 105 °C before use.
- Apparatus essentials:
- Analytical balance (0.001 g resolution)
- 100 ml beaker and inert metal or covered glass dish (≈75 mm deep, 90 mm diameter)
- Glass stirring rod
- Electrically heated vacuum oven capable of 70 ± 1 °C, uniform heat distribution and maintaining reduced pressure
- Vacuum pump able to reduce oven pressure to 34 mbar or less
- Drying train with silica gel and acid scrubber; desiccator with desiccant
- Drying schedule and constant mass criterion:
- Initial drying: 5 h at 70 ± 1 °C under ≤ 34 mbar with a slow air stream through the drying train
- After initial drying, crush the kieselguhr, return to oven for a further 10 h at same conditions
- Constant mass: loss after the second 5 h drying period should be ≤ 0.02% of the test portion mass
- If constant mass not reached after a total of 20 h, repeating the test is recommended (likely due to inadequate mixing)
- Replicates and reporting:
- Perform two determinations on the same laboratory sample
- Report method, operating conditions not specified in the standard, and any circumstances affecting results
Applications
- Routine quality control and specification verification of glucose syrups used in food, beverage and ingredient manufacturing
- Analysis of dried syrups, starch sugars and syrups with added fructose (including formulations defined as isoglucose)
- Establishing moisture content for storage, formulation and shelf-life assessment
- Lab-to-lab comparability where standardized vacuum-oven moisture methods are required
Related Standards
- ISO 1742:1980 is the technical revision replacing ISO Recommendation R 1742-1970 and was developed by ISO/TC 93 (Starch and derivatives).
- When implementing this method, consider other ISO and regional standards for carbohydrate analysis, moisture determination and equipment calibration to ensure traceability and compliance.
This standard provides a practical, validated procedure for accurate dry matter determination in glucose syrups. Adherence to prescribed temperatures, pressures, mixing with kieselguhr and the constant mass criterion is essential for reproducible results used in product quality control and specification management.
Технические детали
- Технический комитет
- ISO/TC 93 - Starch (including derivatives and by-products)
- SKU
- ISO 1742:1980
Похожие стандарты
Другие стандарты ISO
ISO 8212:1986
ОтменёнSoaps and detergents — Techniques of sampling during manufacture
Overview Standard Reference: ISO 8212:1986 Title: Soaps and detergents - Techniques of sampling during manufacture ISO 8212:1986 defines standardized techniques for taking representative samples of s…
ISO 20662:2020
ДействующийShips and marine technology — Hopper dredger supervisory and control systems
Overview ISO 20662:2020 - Ships and marine technology: Hopper dredger supervisory and control systems (HD‑SCS) - specifies the components, structure, general requirements, and functional requirements…
ISO 3021:2023
ДействующийAdventure tourism — Hiking and trekking activities — Requirements and recommendations
Overview ISO 3021:2023 - Adventure tourism: Hiking and trekking activities - Requirements and recommendations defines safety-focused requirements and recommendations for hiking and trekking offered a…
ISO 3826-2:2008
ДействующийPlastics collapsible containers for human blood and blood components — Part 2: Graphical symbols for use on l…
Overview ISO 3826-2:2008 - "Plastics collapsible containers for human blood and blood components - Part 2: Graphical symbols for use on labels and instruction leaflets" defines a system of internatio…
ISO/IEC 24730-1:2014
ДействующийInformation technology — Real-time locating systems (RTLS) — Part 1: Application programming interface (API)
Overview ISO/IEC 24730-1:2014 specifies the Application Programming Interface (API) for Real‑Time Locating Systems (RTLS). The standard defines a minimal, interoperable boundary that lets application…
ISO 8668-5:1992
ДействующийAircraft — Terminal junction systems — Part 5: Detail specification for type 3 system
Overview - ISO 8668-5:1992 (Aircraft terminal junction systems, Type 3) ISO 8668-5:1992 defines the detail specification for Type 3 Terminal Junction Systems (TJS) used in aircraft electrical install…
ISO 7574-3:1985
ДействующийAcoustics — Statistical methods for determining and verifying stated noise emission values of machinery and e…
Overview ISO 7574-3:1985 is part of the ISO 7574 series on acoustics and provides a simple (transition) statistical method for determining and verifying stated noise emission values for batches (lots…
ISO 15638-15:2014
ДействующийIntelligent transport systems — Framework for cooperative telematics applications for regulated vehicles (TAR…
Overview - ISO 15638-15:2014 (Vehicle location monitoring, TARV) ISO 15638-15:2014 is part of the ISO 15638 suite for Intelligent Transport Systems (ITS) and defines the framework and data specificat…