ISO 17607-1:2023
Steel structures — Execution of structural steelwork — Part 1: General requirements and terms and definitions
Steel structures — Execution of structural steelwork — Part 1: General requirements and terms and definitions
- Статус документа:
- Действующий
- Формат:
- Электронный (PDF)
- Количество страниц:
- 32
- Дата публикации:
- 8 декабря 2023 г.
- Издание:
- ISO IS 17607 edition 1 version 1
- ICS:
- 01.040.91
This document defines general requirements for the execution of structural steelwork for: — structural steel buildings; — general structures, designed, fabricated, and erected in a manner similar to buildings with building-like load-resisting elements, e.g. support framing for equipment, tanks, vessels, and pipelines; — crane-supporting structures; — typical roadway and pedestrian bridges including those constructed using rolled sections, welded plate girders, or trusses (lattices). This document applies to structures or fabricated components that are produced from: — hot-rolled and cold-formed structural steel products up to and including a nominal yield strength of 700 MPa with a thickness of 3 mm and above; — hot-finished and cold-formed structural steel hollow sections, up to and including a nominal yield strength of 700 MPa, including standard range and custom-made rolled products and hollow sections manufactured by welding. This document also applies to steel components in composite steel and concrete structures, and in structures combining steel with other materials. This document defines requirements independent of the type and shape of the steel structure, including structures subjected to fatigue or seismic loading. The requirements are expressed in terms of execution levels. This document does not define all requirements for other types of fabricated steel structures (e.g. railway bridges, roadway and pedestrian bridges using welded box sections or arch boxes, cable-supported bridges over 100 m span, moving bridges, monorails, steel towers, masts, chimneys, silos, tanks, pipelines, antennae, offshore platforms). However, this document provides general guidance regarding fabrication and erection practices that may be used together with the appropriate ISO, regional or national design standards for such structures. This document does not cover requirements for the following: — sheeting; — fabrication of stainless steels. This document does not apply to design of steel structures. NOTE Design is inextricably a part of the design-fabrication-erection sequence, including the application of tolerances, and cannot be considered in isolation. This document is intended to be used, as appropriate, together with national standards and other documents, observing the provisions in this document concerning such use.
Abstract
Overview
ISO 17607-1:2023 - "Steel structures - Execution of structural steelwork - Part 1: General requirements and terms and definitions" establishes the general execution requirements and common terminology for fabrication and erection of structural steelwork. It applies to structural steel buildings, building-like general structures (e.g., equipment support frames, tanks, pipelines), crane-supporting structures, and typical roadway/pedestrian bridges built from rolled sections, welded plate girders, or trusses. The standard covers steel products (hot-rolled, cold-formed, hollow sections) with nominal yield strength up to 700 MPa and thicknesses from 3 mm and above. Design rules are excluded - the document focuses on execution, not structural design.
Key topics and technical requirements
- Terms and definitions: Unified vocabulary for fabrication, erection, components, AESS (architecturally exposed structural steel), suppliers, manufacturers, and constructors.
- Execution specification: Framework for project-specific documents that define technical data, execution levels, and options.
- Execution levels: Requirements expressed in graded execution levels to suit different project complexity and quality needs (see annexes for guidance).
- Quality management and documentation: Requirements for quality systems, quality plans, execution documentation and traceability/identification of constituent products.
- Geometrical tolerances and AESS: Tolerances for fabricated and erected components and special provision for architecturally exposed steel finishes and appearance.
- Inspection, testing and correction: Procedures for inspecting constituent products and components, managing non-conformances, and documentation needed to claim conformity.
- Scope limits and exclusions: Does not cover stainless steel fabrication, sheeting, nor full requirements for specialized structures (e.g., long-span cable-stayed bridges, offshore platforms).
Applications and who uses it
ISO 17607-1:2023 is intended for:
- Specifiers and owners preparing execution specifications for projects without a governing national/regional standard.
- Fabricators and erectors implementing quality plans, traceability and inspection procedures.
- Designers, project engineers and contractors coordinating fabrication/erection practices with tolerances and execution levels.
- Inspectors and certification bodies assessing conformity and reviewing execution documentation.
Practical applications include building frames, crane runways, equipment support structures, and many bridge types using conventional steel sections. The standard is especially useful for international projects and to reduce trade barriers by harmonizing execution practices.
Related standards
- ISO 17607 series: Parts 2 (Steels), 3 (Fabrication), 4 (Erection), 5 (Welding), 6 (Bolting)
- ISO 6707-1 / ISO 6707-2 (vocabulary for buildings)
- ISO/TR 25901-1 (welding vocabulary)
- ISO 7976 (tolerances for building measurements)
Keywords: ISO 17607-1:2023, steel structures, execution of structural steelwork, execution levels, AESS, fabrication, erection, quality plan, inspection, traceability.
Технические детали
- Технический комитет
- ISO/TC 167 - Steel and aluminium structures
- SKU
- ISO 17607-1:2023
Похожие стандарты
Стандарты, упомянутые в описании
BS ISO 17607-6:2023
ДействующийSteel structures. Execution of structural steelwork. Bolting.
ISO 6707-1:2020
ДействующийBuildings and civil engineering works — Vocabulary — Part 1: General terms
Overview ISO 6707-1:2020 (identical to ISO 6707-1:2020) is a vocabulary standard for buildings and civil engineering works. It defines general terms and preferred English usage to establish a common…
ISO 6707-2:2017
ДействующийBuildings and civil engineering works — Vocabulary — Part 2: Contract and communication terms
Overview ISO 6707-2:2017 - Buildings and civil engineering works - Vocabulary - Part 2: Contract and communication terms - is an international terminology standard that defines the language used for…
ISO/TR 25901-1:2016
ДействующийWelding and allied processes — Vocabulary — Part 1: General terms
Overview ISO/TR 25901-1:2016 - Welding and allied processes - Vocabulary - Part 1: General terms defines the core terminology used across welding and allied processes. This Technical Report provides…
ISO 7976-1:1989
ДействующийTolerances for building — Methods of measurement of buildings and building products — Part 1: Methods and ins…
Overview ISO 7976-1:1989 - Tolerances for building: Methods of measurement of buildings and building products - Part 1: Methods and instruments specifies alternative, standardized measuring methods a…