ISO 21712:2020

Name: ISO 21712:2020 — Fine ceramics (advanced ceramics, advanced technical ceramics) — Test method for flexural bond strength of ceramics
SKU: ISO 21712:2020
Price: 25 EUR
Availability: InStock

Fine ceramics (advanced ceramics, advanced technical ceramics) — Test method for flexural bond strength of ceramics

Название (английский):

ISO 21712:2020

Fine ceramics (advanced ceramics, advanced technical ceramics) — Test method for flexural bond strength of ceramics

Статус документа:: Действующий
Формат:: Электронный (PDF)
Количество страниц:: 12
Дата публикации:: 2 апреля 2020 г.
Издание:: ISO IS 21712 edition 1 version 1
ICS:: 81.060.30

Тип поставки:

Full version25 €Ask AI2 €Read online 24h10 €Read online 72h15 €

Язык документа:

ruen

Срок поставки:1 рабочий день

Цена:25 €

Описание (английский):

This document specifies a test method for determining the flexural bond strength of ceramic/ceramic joints or ceramic/metal joints at room temperature. The substrate materials, for example ceramic or metal, are both monolithic. This method can be used to test the interfacial bond strength of the joint under bending conditions. It can be used for the development of joining materials and/or for the quality control of joints, the characterization and generating design data purposes.

Abstract

Похожие стандарты

Стандарты, упомянутые в описании

Overview

ISO 21712:2020 specifies a standardized laboratory test method for flexural bond strength of joints in fine/advanced ceramics - including ceramic/ceramic and ceramic/metal joints - measured at room temperature. The standard covers beam-type specimens with monolithic substrates and defines how to load joints in bending (four-point flexure) to determine the maximum interfacial stress at fracture. Typical uses include development of joining materials, quality control of bonds, material characterization and generation of design data.

Key topics and technical requirements

Test principle: Beam specimen containing the bonded interface is loaded in bending until fracture; peak load, specimen geometry and fixture dimensions are used to compute flexural bond strength (assumes linear elastic behavior).

Four-point flexure configurations: Includes 1/4-point and 1/3-point four-point setups; inner and outer span positions and bearing diameters are specified.

Specimen types: Defines Type A (single interface) and Type B (two or more interfaces) specimens, with standard dimensions, tolerances, chamfering/rounded-edge requirements and recommended orientations (interface near specimen center, perpendicular to longitudinal axis).

Apparatus:

Testing machine accuracy per ISO 7500-1, Class 1 (force-measuring accuracy ~1%).
Fixtures: semi‑articulating or fully‑articulating four‑point fixtures to ensure uniform loading; bearings must roll freely to avoid frictional constraint.
Bearings: cylindrical rollers/bearings per ISO 14704 specifications.
Measurement: micrometer with 0.002 mm resolution (ISO 3611) or equivalent.

Specimen preparation and handling: Machining procedures, parallelism and orthogonality tolerances, chamfer/rounding dimensions and number of specimens required are specified to ensure repeatability.

Procedure, calculation and reporting: Steps to perform the test, compute flexural bond strength from fracture load and geometry, and required test report information.

Applications and users

ISO 21712:2020 is intended for:

Materials and mechanical test laboratories performing bond strength evaluation

Ceramic and ceramic‑to‑metal joining material developers (glasses, adhesives, brazes)

Quality control and acceptance testing in advanced ceramic manufacturing

R&D and failure analysis teams generating mechanical design data for components

Industries that benefit include electronics, aerospace, automotive, medical devices and any sector using advanced technical ceramics where reliable bonded joints are critical.

Related standards

ISO 14704:2016 - flexural strength of monolithic ceramics (related fixture and bearing guidance)

ISO 7500-1 - calibration and verification of testing machines

ISO 3611 - micrometers for external measurements

Keywords: ISO 21712:2020, flexural bond strength, fine ceramics, advanced ceramics, four-point flexure, ceramic/metal joints, test method, quality control, joining materials.

ISO 21712:2020

Abstract

Похожие стандарты

Overview

Key topics and technical requirements

Applications and users

Related standards

Технические детали

ISO 14704:2016

Fine ceramics (advanced ceramics, advanced technical ceramics) — Test method for flexural strength of monolit…

ISO 7500-1:2018

Metallic materials — Calibration and verification of static uniaxial testing machines — Part 1: Tension/compr…

BS EN ISO 3611:2023

Geometrical product specifications (GPS). Dimensional measuring equipment. Design and metrological characteri…