ISO 22553-14:2021

Overview

ISO 22553-14:2021 - Paints and varnishes - Electro-deposition coatings - Part 14: Deposition behaviour specifies a laboratory method to determine the deposition behaviour of electro‑deposition coatings (e-coats) on different substrates and after various pre-treatments. The standard is intended for automotive and general industrial applications (e.g., chillers, consumer products, radiators, aerospace, agriculture) and defines how to run controlled e-coating trials and record resulting film thickness and surface quality.

Key topics and requirements

• Principle: Immerse a test panel and a counter‑electrode in a laboratory deposition tank and coat at specified voltages, bath temperatures and times; measure dry film thickness for each condition.
• Apparatus: laboratory deposition tank with circulation, DC power supply, agitator or pump, oven for curing. Measurement devices include a dry film thickness gauge (max error 0.3 µm), thermometer (±0.1 °C) and stopwatch.
• Test panels: conductive panels prepared per ISO 1514, ~190 × 105 × 0.75 mm, with defined pre‑treatment.
• Operating parameters: set bath temperature (typically 25–35 °C), control to ±0.5 °C for deposition; select voltage/time to reach nominal dry film thickness; rinse with demineralized water per ISO 23321 and cure at object‑appropriate temperatures (commonly 100–180 °C).
• Measurement and evaluation: measure dry film thickness at five points per zone (per ISO 2808) and record mean values for combinations of voltage and bath temperature. Visually inspect for surface defects (e.g., pitting).
• Reporting: report identification of coating, reference to ISO 22553-14:2021, bath voltage/temperature, deposition times (ramp and hold), curing temperature/time, measured thickness results, deviations, anomalies and test date.
• Reproducibility: the standard notes that precision (fidelity) data are not currently available.

Practical applications

• Use ISO 22553-14 to:
  • Characterize how an e-coat deposits under varying voltages and temperatures.
  • Compare coatings, substrates or pre-treatment processes during R&D.
  • Set production targets for bath voltage and cure conditions to achieve required film thickness.
  • Support quality control and failure investigation by documenting deposition behaviour and surface defects.

Who should use this standard

• Coating formulators and R&D laboratories
• Automotive OEMs and tier suppliers
• Industrial e-coating operations and process engineers
• Independent testing laboratories and quality assurance teams

Related standards

• ISO 1514 (test panels)
• ISO 2808 (film thickness measurement methods)
• ISO 4618 (terms and definitions)
• ISO 22553-1 (e-coat vocabulary)
• ISO 23321 (demineralized water for industrial use)

Keywords: ISO 22553-14:2021, electro-deposition, deposition behaviour, e-coat testing, e-coating, paints and varnishes, film thickness measurement, automotive coatings.