ISO 2927:1973

Name: ISO 2927:1973 — Aluminium oxide primarily used for the production of aluminium — Sampling
SKU: ISO 2927:1973
Price: 25 EUR
Availability: InStock

Aluminium oxide primarily used for the production of aluminium — Sampling

Название (английский):

ISO 2927:1973

Aluminium oxide primarily used for the production of aluminium — Sampling

Статус документа:: Действующий
Формат:: Электронный (PDF)
Количество страниц:: 3
Дата публикации:: 1 декабря 1973 г.
Издание:: ISO IS 2927 edition 1 version 1
ICS:: 71.100.10

Тип поставки:

Full version25 €Ask AI2 €Read online 24h10 €Read online 72h15 €

Язык документа:

ruen

Срок поставки:1 рабочий день

Цена:25 €

Описание (английский):

Details the practical requirements for taking representative samples intended for chemical analysis and determination of the physical characteristics. Applicable to products during transport, loading/unloading, contimuous flow and storage. Will be revised when general methods are available. Taking samples is carried out without reduction of particle size by manual or mechanical removal of increments of constant mass. Storage of the increments and transport at ambient temperature in closed containers. Shall remain in the same physical and chemical state in which the sample has been drawn until the time of laboratory examination. Has also been approved by the IUPAC.

Abstract

Похожие стандарты

Другие стандарты ISO

Overview

ISO 2927:1973 specifies practical requirements for taking representative samples of aluminium oxide (alumina) intended for chemical analysis and determination of physical characteristics. The standard applies to alumina during transport, loading/unloading, continuous flow and storage, and remains an interim reference until broader general sampling methods are published. It has also been approved by IUPAC.

Key principles include sampling without reducing particle size, taking increments of constant mass, and keeping the sample in the same physical and chemical state from collection until laboratory examination.

Key Topics

Scope and purpose: Representative sampling for chemical and physical testing of aluminium oxide used in aluminium production.

Sampling principle: Remove increments of constant mass manually or mechanically; do not reduce particle size during sampling.

Sampling during continuous flow: Take increments from the full width of the flow (never from the belt) at regular time intervals (example: increments representing 1/20th of conveyor operating time). Minimum increment sizes and batch requirements are specified.

Apparatus and handling:

Use suitable manual or mechanical equipment (e.g., Archimedean screws, inclined chutes).
Prefer plastic sample vessels and avoid non-rigid sacks.
Prevent free fall and segregation; transfer samples with screws or inclined chutes.

Sample sizes:

A typical laboratory sample of 500 g is sufficient for alumina with particle sizes from a few micrometres up to 300 µm.
Bulk and laboratory sample increment counts vary by situation; for example, one increment per 10 m3 for containers of specified capacity, and ten to fifteen increments per batch for larger loads.

Environmental control and storage:

Store and transport laboratory samples at ambient temperature in closed, airtight containers.
When measuring physical properties, fill the flask to the brim and stopper to avoid particle displacement and moisture exchange.

Reporting: The sampling report should include method reference, proportion of the lot sampled, number and characteristics of laboratory samples, unusual observations, and any optional operations performed.

Applications

This standard provides practical guidance for:

Industrial sampling of alumina during conveyor transport, silo/tank unloading, ship holds and heaps.

Preparing representative laboratory samples for chemical analysis, quality control and acceptance testing.

Minimizing errors from segregation, moisture exchange, and particle-size alteration during sampling and transport.

Practical benefits include improved traceability, consistent sampling procedures across operations, and reliable test results for process control in aluminium production.

Related Standards

ISO standards on sampling of bulk and powdered materials (general sampling methods are under development and will prompt revision of ISO 2927).

Industry-specific sampling and testing procedures used by aluminium producers and analytical laboratories.

For implementation, follow the detailed procedures in ISO 2927:1973 for apparatus selection, increment frequency and handling to ensure representative, uncontaminated samples for laboratory examination.

ISO 2927:1973

Abstract

Похожие стандарты

Overview

Key Topics

Applications

Related Standards

Технические детали

ISO 8212:1986

Soaps and detergents — Techniques of sampling during manufacture

ISO 20662:2020

Ships and marine technology — Hopper dredger supervisory and control systems

ISO 3021:2023

Adventure tourism — Hiking and trekking activities — Requirements and recommendations

ISO 3826-2:2008

Plastics collapsible containers for human blood and blood components — Part 2: Graphical symbols for use on l…

ISO/IEC 24730-1:2014

Information technology — Real-time locating systems (RTLS) — Part 1: Application programming interface (API)

ISO 8668-5:1992

Aircraft — Terminal junction systems — Part 5: Detail specification for type 3 system

ISO 7574-3:1985

Acoustics — Statistical methods for determining and verifying stated noise emission values of machinery and e…

ISO 15638-15:2014

Intelligent transport systems — Framework for cooperative telematics applications for regulated vehicles (TAR…