★Низкие цены. Оригиналы и переводы — экономьте время и бюджет.

Каталог Подписки О компании Поддержка и оплата Публичная оферта Контакты

Поиск

Корзинапуста

GLSTDStandards Store

Официальный магазин стандартов ГОСТ, ISO, ASTM. Электронная доставка, актуальные редакции, прозрачные цены.

Компания

О компании
Контакты
Поддержка и оплата

Помощь

Каталог
Корзина
Поиск

Правовая информация

Публичная оферта
Политика конфиденциальности
Условия использования

Способы оплаты:VisaMastercardMIRСБПЮMoneyСберТинькоффPayPalApple PayGoogle PayKlarnaStripe

//ISO 7721-2:1990

ISO 7721-2:1990

Name: ISO 7721-2:1990 — Countersunk flat head screws — Part 2: Penetration depth of cross recesses
SKU: ISO 7721-2:1990
Price: 25 EUR
Availability: InStock

Countersunk flat head screws — Part 2: Penetration depth of cross recesses

Название (английский):

ISO 7721-2:1990

Countersunk flat head screws — Part 2: Penetration depth of cross recesses

Статус документа:: Действующий
Формат:: Электронный (PDF)
Количество страниц:: 3
Дата публикации:: 23 августа 1990 г.
Издание:: ISO IS 7721 edition 1 version 1
ICS:: 21.060.10

Тип поставки:

Full version25 €Ask AI2 €Read online 24h10 €Read online 72h15 €

Язык документа:

ruen

Срок поставки:1 рабочий день

Цена:25 €

Описание (английский):

La présente partie de l'ISO 7721 prescrit la profondeur de pénétration des empreintes cruciformes des vis à métaux à tête fraisée pour les séries 1 et 2, profonde et basse, respectivement.

Abstract

Overview

ISO 7721-2:1990 is an international standard developed by the International Organization for Standardization (ISO) that specifies the penetration depth of cross recesses in countersunk flat head screws. This part 2 of the series focuses exclusively on defining the optimal depth for the cross-shaped recess on screw heads to balance two critical requirements: and .

Key Topics

Penetration Depth of Cross Recesses
Defines two series of cross recess penetration depth for countersunk flat head screws:
- Series 1: Deep cross recess for enhanced wrenchability and adequate head strength (mainly for low-strength screws).
- Series 2: Shallow cross recess to increase head strength, requiring additional design considerations (such as an underhead shoulder) for higher-strength screws.
Balance Between Strength and Wrenchability
Shallower recesses provide stronger screw heads but reduce grip with the driver. Conversely, deeper recesses improve wrenchability but may weaken the head. The standard presents a compromise to meet both demands.
Underhead Shoulder Configurations
To maintain sufficient head strength with deeper recesses on high-strength screws, an underhead shoulder is incorporated. This assures the mechanical integrity of the screw head under load.
Dimensional Specifications
The standard provides precise dimensional values for penetration depths relative to screw size and type, ensuring compatibility and interchangeability across manufacturers and applications.
Normative References
ISO 7721-2 refers to related standards such as:
- ISO 225 for fastener symbols and dimension designations
- ISO 4757 for cross recess specifications
- ISO 7721-1 for head configuration and gauging

Applications

ISO 7721-2:1990 is critical for manufacturers and users of countersunk flat head screws featuring cross recesses. Its practical applications include:

Fastener Manufacturing
Enables consistent production of screws with standardized cross recess depths, ensuring interchangeability and quality compliance.
Mechanical Assembly and Maintenance
Provides guidelines for screw design to optimize assembly efficiency and reduce the risk of cam-out or damage during fastening.
Product Design in Engineering
Assists designers in selecting appropriate screw types based on strength requirements and ease of driving, particularly in the automotive, aerospace, electronics, and construction industries.
Quality Assurance and Testing
Helps inspectors verify that screw products meet international standards for head strength and recess penetration, contributing to overall product reliability.

Related Standards

ISO 7721-1: Countersunk flat head screws - Head configuration and gauging
Defines the geometric parameters and inspection methods for screw heads, complementary to the recess depth specifications of ISO 7721-2.
ISO 4757: Cross recesses for screws
Details dimensions and tolerances for cross recess shapes, supporting the correct interpretation of recess depth requirements.
ISO 7046 Series: Cross recessed countersunk flat head screws
Applies results of ISO 7721-2 for practical use in screw grades and property classes such as 4.8 and 8.8, establishing a link between recess depth and mechanical performance.

Summary

ISO 7721-2:1990 plays a pivotal role in standardizing the penetration depths of cross recesses in countersunk flat head screws to optimize the interplay between head strength and wrenchability. Adhering to this standard ensures fastener reliability, compatibility, and ease of use across diverse industrial applications. By following ISO 7721-2 specifications, manufacturers and engineers can achieve superior mechanical performance and facilitate efficient, damage-free assembly processes.

Keywords: ISO 7721-2, countersunk flat head screws, cross recess penetration depth, screw head strength, wrenchability, fastener standards, screw dimensions, ISO fasteners, screw manufacturing, mechanical assembly.

Технические детали

Технический комитет: ISO/TC 2/SC 11 - Fasteners with metric external thread
SKU: ISO 7721-2:1990

Главная

Каталог

ISO 7721:1983

Действующий

Countersunk head screws — Head configuration and gauging

Overview ISO 7721:1983 - "Countersunk head screws - Head configuration and gauging" defines the head geometry and verification method for metric countersunk head screws with thread sizes M1.6 through…

3 · PDF

25 €

ISO 22519:2019

Отменён

Purified water and water for injection pretreatment and production systems

35 · PDF

25 €

ISO 4757:1983

Действующий

Cross recesses for screws

Overview ISO 4757:1983 - Cross recesses for screws specifies the geometry and gauging methods for cruciform (cross) recesses used in screw heads. First published in 1983 by ISO/TC 2 (Fasteners), the…

9 · PDF

25 €