ISO 8619:2003

Name: ISO 8619:2003 — Plastics — Phenolic resin powder — Determination of flow distance on a heated glass plate
SKU: ISO 8619:2003
Price: 25 EUR
Availability: InStock

Plastics — Phenolic resin powder — Determination of flow distance on a heated glass plate

Название (английский):

ISO 8619:2003

Plastics — Phenolic resin powder — Determination of flow distance on a heated glass plate

Статус документа:: Действующий
Формат:: Электронный (PDF)
Количество страниц:: 4
Дата публикации:: 25 апреля 2003 г.
Издание:: ISO IS 8619 edition 3 version 1
ICS:: 83.080.10

Тип поставки:

Full version25 €Ask AI2 €Read online 24h10 €Read online 72h15 €

Язык документа:

ruen

Срок поставки:1 рабочий день

Цена:25 €

Описание (английский):

ISO 8619:2003 specifies a method for the determination of the flow distance of powdered heat-setting phenolic resins for production and control. With reference to tablet formation, test temperature and angle of inclination of the glass plate, measurement of the flow distance involves arbitrarily defined conditions. The flow distance is dependent on the reactivity and melt viscosity of the resins. Rapid solidification and high melt viscosity shorten the flow distance.

Abstract

Похожие стандарты

Другие стандарты ISO

Overview

ISO 8619:2003 specifies a standardized test method to determine the flow distance of powdered heat-setting phenolic resins on a heated glass plate. The measured flow distance reflects the resin's reactivity and melt viscosity and is intended for production control and quality assurance of thermosetting phenolic powders.

Key controlled conditions in the method include the test temperature, sample pastillage, and the plate inclination - all of which are defined to ensure comparable results across laboratories.

Key Topics

Test principle: Preformed pastilles of resin powder are placed on a glass plate maintained at (125 ± 1) °C. After an initial horizontal hold, the plate is inclined and the flow distance is measured.

Sample preparation: Typical pastille mass is 0,500 g, pressed to a diameter of (12,5 ± 0,3) mm and thickness (4,8 ± 0,2) mm. For powders with high apparent density (e.g., mineral-filled), a larger mass may be used to obtain the required thickness.

Apparatus: Required equipment includes an oven with natural ventilation capable of maintaining 125 °C, a cylindrical pastillage press, a 1 mg-precision balance, an externally operable inclined support, and a clean, smooth glass plate (example dimensions provided in the standard).

Procedure highlights:

Preheat the glass plate in the oven for at least 60 minutes at 125 °C.
Place two pastilles on the plate, hold horizontally for 3 min (± 3 s), then incline to (60° ± 1°) within 3 s.
Maintain the inclined position for 20 min, cool, then measure the flow length to 1 mm accuracy. Include the pastille diameter in the measurement.

Results and repeatability: Report the arithmetic mean of two measurements. If the two values differ by more than 5%, repeat the test. For flow distances > 20 mm the repeatability and reproducibility are 10%; for ≤ 20 mm they are 2 mm.

Related Standards

When reporting and using ISO 8619:2003 results, consider referencing or cross-checking related ISO test methods for plastics and thermosetting materials, and include the following in test reports as required by the standard:

Reference to ISO 8619:2003

Full sample identification

How the inclination was achieved (from outside or by opening the oven)

Individual determinations and arithmetic mean

Description of any pastille slippage or fusion

This method provides a repeatable, practical measure of flow behavior that helps manufacturers and laboratories monitor resin reactivity and processing performance without requiring complex instrumentation.

ISO 8619:2003

Abstract

Похожие стандарты

Overview

Key Topics

Applications

Related Standards

Технические детали

ISO 8212:1986

Soaps and detergents — Techniques of sampling during manufacture

ISO 20662:2020

Ships and marine technology — Hopper dredger supervisory and control systems

ISO 3021:2023

Adventure tourism — Hiking and trekking activities — Requirements and recommendations

ISO 3826-2:2008

Plastics collapsible containers for human blood and blood components — Part 2: Graphical symbols for use on l…

ISO/IEC 24730-1:2014

Information technology — Real-time locating systems (RTLS) — Part 1: Application programming interface (API)

ISO 8668-5:1992

Aircraft — Terminal junction systems — Part 5: Detail specification for type 3 system

ISO 7574-3:1985

Acoustics — Statistical methods for determining and verifying stated noise emission values of machinery and e…

ISO 15638-15:2014

Intelligent transport systems — Framework for cooperative telematics applications for regulated vehicles (TAR…