ISO 1179-4:2007

Name: ISO 1179-4:2007 — Connections for general use and fluid power — Ports and stud ends with ISO 228-1 threads with elastomeric or metal-to-metal sealing — Part 4: Stud ends for general use only with metal-to-metal sealing (type B)
SKU: ISO 1179-4:2007
Price: 14400 RUB
Availability: InStock

Connections for general use and fluid power — Ports and stud ends with ISO 228-1 threads with elastomeric or metal-to-metal sealing — Part 4: Stud ends for general use only with metal-to-metal sealing (type B)

Название (английский):

ISO 1179-4:2007

Статус документа:: Действующий
Формат:: Электронный (PDF)
Количество страниц:: 8
Дата публикации:: 13 августа 2007 г.
Издание:: ISO IS 1179 edition 1 version 1
ICS:: 23.100.40

Тип поставки:

Full version14 400 ₽Read online 24h1 200 ₽Read online 72h1 800 ₽

Язык документа:

ruen

Срок поставки:2 раб. дн. (перевод)

Цена:14 400 ₽

Описание (английский):

ISO 1179-4:2007 specifies dimensions, performance requirements and test procedures for stud ends with ISO 228-1 threads and metal-to-metal sealing for general use only. These stud ends should not be used for leak-free hydraulic fluid power applications.

Abstract

Похожие стандарты

Стандарты, упомянутые в описании

Overview

ISO 1179-4:2007 specifies dimensions, performance requirements and test procedures for stud ends with ISO 228-1 threads and metal-to-metal sealing intended for general use (type B). The standard applies to stud ends used with ports and connectors in fluid conveyance systems but explicitly states these stud ends should not be used for leak‑free hydraulic fluid power applications. Stud ends conforming to ISO 1179-4 are intended for use up to defined working pressures depending on series (S, L, LL) and require manufacturer testing to verify rated performance.

Key topics and technical requirements

Threading and sealing: Uses ISO 228-1 pipe threads; sealing is metal‑to‑metal (no elastomeric O‑ring).

Dimensions and tolerances: Detailed geometries and hexagon tolerances (ISO 4759‑1 product grade C) are provided (Figure/Table references in the standard).

Working pressures by series: Typical permissible working pressures (for low carbon steel parts) are:

S series: up to 40 MPa (400 bar)
L series: up to 25 MPa (250 bar)
LL series: up to 10 MPa (100 bar)

Performance tests:

Burst (failure) test: three samples, with a required burst-to-working pressure ratio of 4:1.
Cyclic endurance (impulse) test: six samples must survive 1,000,000 cycles at the specified impulse pressure.
Test blocks and procedures reference ISO 19879 (materials, pressure rise rate, lubrication).

Material and finishing: Typical test materials are low carbon steel with plating; manufacturers must certify hardness and tensile values in test reports.

Assembly considerations: Metal-to-metal sealing deforms the port sealing face-safe reassembly is not possible. Test torques are specified (Table 3) for qualification; note: these torques are for testing only-actual assembly torque depends on lubrication, coating and surface finish.

Designation and identification: Stud ends are designated with the part reference (ISO 1179-4), thread size and series (e.g., “Stud end ISO 1179-4 - G 3/8 A-S”).

Applications and who uses it

ISO 1179-4 is relevant to:

Hydraulic and pneumatic component manufacturers producing threaded stud ends and connectors for general use

Test laboratories performing burst and impulse qualification

Design engineers and procurement teams specifying threaded connections for piping, hose fittings, and tube assemblies where metal-to-metal sealing is acceptable

Maintenance and quality assurance personnel validating connector performance and traceability

This standard is particularly useful when ISO 228-1 threaded stud ends with metal sealing are required and when users need a clear testing and designation framework.

Related standards

ISO 1179 parts 1–3 (ports and other stud end types)

ISO 228-1 (pipe thread dimensions)

ISO 19879 (test methods for metallic tube connections)

ISO 6149, ISO 8434 series (related hydraulic/connector standards)

Keywords: ISO 1179-4:2007, stud ends, ISO 228-1, metal-to-metal sealing, fluid power, working pressure, burst test, impulse test, connector standards.

ISO 1179-4:2007

Abstract

Похожие стандарты

Overview

Key topics and technical requirements

Applications and who uses it

Related standards

Технические детали

BS ISO 22810:2010

Horology. Water-resistant watches.

SIST EN ISO 1179-4:2008

Connections for general use and fluid power - Ports and stud ends with ISO 228-1 threads with elastomeric or…

SIST EN ISO 4759-1:2002

Tolerances for fasteners - Part 1: Bolts, screws, studs and nuts - Product grades A, B and C (ISO 4759-1:2000)

SIST EN ISO 19879:2021

Metallic tube connections for fluid power and general use - Test methods for hydraulic fluid power connection…

BS ISO 11790:2017

Copper, lead, zinc and nickel concentrates. Guidelines for the inspection of mechanical sampling systems.

SIST EN ISO 6149-1:2022

Connections for hydraulic fluid power and general use - Ports and stud ends with ISO 261 metric threads and O…

ISO 12151-1:2010/Amd 1:2017

Connections for hydraulic fluid power and general use — Hose fittings — Part 1: Hose fittings with ISO 8434-3…