ISO 13844:2022

Name: ISO 13844:2022 — Plastics piping systems — Elastomeric-sealing-ring-type socket joints for use with plastic pipes — Test method for leaktightness under negative pressure, angular deflection and deformation
SKU: ISO 13844:2022
Price: 12600 RUB
Availability: InStock

Plastics piping systems — Elastomeric-sealing-ring-type socket joints for use with plastic pipes — Test method for leaktightness under negative pressure, angular deflection and deformation

Название (английский):

ISO 13844:2022

Plastics piping systems — Elastomeric-sealing-ring-type socket joints for use with plastic pipes — Test method for leaktightness under negative pressure, angular deflection and deformation

Статус документа:: Действующий
Формат:: Электронный (PDF)
Количество страниц:: 7
Дата публикации:: 9 февраля 2022 г.
Издание:: ISO IS 13844 edition 3 version 1
ICS:: 23.040.20

Тип поставки:

Full version12 600 ₽Read online 24h1 200 ₽Read online 72h1 800 ₽

Язык документа:

ruen

Срок поставки:2 раб. дн. (перевод)

Цена:12 600 ₽

Описание (английский):

This document specifies a method for testing the leak tightness under negative pressure, angular deflection and deformation of assembled joints between elastomeric-sealing-ring-type sockets made of plastic or metal and plastic pressure pipes.

Abstract

Похожие стандарты

Упомянутые в описании и другие стандарты ISO

Overview

ISO 13844:2022 defines a standardized test method for leaktightness of elastomeric-sealing-ring-type socket joints used with plastic pressure pipes. The standard describes how to evaluate joint performance under negative internal pressure (partial vacuum), angular deflection and pipe deformation. It is intended for assembled joints between elastomeric-sealed sockets (plastic or metal) and plastic pipes and supports consistent type testing, quality control and conformity assessment of plastic piping systems.

Key topics and requirements

Test principle: A pipe section restrained in a socket is subjected to a specified negative internal pressure while undergoing angular deflection and, where required, diametric deformation; the joint is inspected for leakage over the test period.

Test parameters: The referring standard or Annex A specifies test medium, pressures, duration, temperature, deformation (%), angle of deflection (°) and free length (L). Annex A gives typical values:

Test medium: air
Test temperature: 20 ± 5 °C
Deformation: 5 %
Angle of deflection: 2°
Two negative gauge pressures: −0.1 ± 0.02 bar and −0.8 ± 0.02 bar (≈ −10 kPa and −80 kPa)
Free length L = 5 × nominal outside diameter (min 500 mm, max 1 500 mm)

Apparatus: Framework with fixed and movable fixtures to apply angular deflection; vacuum source and vacuum gauge (accuracy ±1%); isolation valve; mechanical/hydraulic device and deforming beams sized per pipe diameter (beam width rules: 100 mm, 150 mm, 200 mm).

Procedure controls: Maintain temperature within ±2 °C; isolate pump after reaching target vacuum and monitor pressure change (stop if change > 0.05 bar); measure deformation at the beam face adjacent to socket mouth.

Test report: Must reference ISO 13844:2022, include component IDs, nominal pressure class or series, angle, temperature, duration, deformation, leak information, deviations and test date.

Applications and users

Manufacturers of plastic pipes and elastomeric-sealed sockets for type testing and design validation

Independent test laboratories and certification bodies performing leak tightness testing

Quality assurance teams for production control and batch verification

Designers, utilities and infrastructure owners specifying reliable socket joint performance in pressure piping systems Practical applications include verification of joints for potable water, sewage, drainage and other plastic pressure pipeline systems where sealing under negative pressure and flexibility under deflection are critical.

Related standards

Prepared by ISO/TC 138 (Plastics pipes) in collaboration with CEN/TC 155.

The beam shape used in ISO 13844:2022 is aligned with ISO 13259 as noted in the foreword.

Keywords: ISO 13844:2022, elastomeric-sealing-ring, socket joints, plastic piping systems, negative pressure test, angular deflection, deformation, leaktightness testing.

ISO 13844:2022

Abstract

Похожие стандарты

Overview

Key topics and requirements

Applications and users

Related standards

Технические детали

SIST EN ISO 13844:2022

Plastics piping systems - Elastomeric-sealing-ring-type socket joints for use with plastic pressure pipes - T…

SIST EN ISO 13259:2020

Thermoplastics piping systems for underground non-pressure applications - Test method for leaktightness of el…

ISO 8689-1:2000

Water quality — Biological classification of rivers — Part 1: Guidance on the interpretation of biological qu…

ISO/ASTM51540-04(2012)

Standard Practice for Use of a Radiochromic Liquid Dosimetry System (Withdrawn 2020)

ISO/ASTM51204-04

Standard Practice for Dosimetry in Gamma Irradiation Facilities for Food Processing (Withdrawn 2013)

ISO/ASTM51431-05

Standard Practice for Dosimetry in Electron Beam and X-Ray (Bremsstrahlung) Irradiation Facilities for Food P…

ISO/ASTM52628-20e1

Standard Practice for Dosimetry in Radiation Processing

ISO/ASTM52921-13(2019)

Standard Terminology for Additive Manufacturing—Coordinate Systems and Test Methodologies