ISO 7507-4:2010

Name: ISO 7507-4:2010 — Petroleum and liquid petroleum products — Calibration of vertical cylindrical tanks — Part 4: Internal electro-optical distance-ranging method
SKU: ISO 7507-4:2010
Price: 25 EUR
Availability: InStock

Petroleum and liquid petroleum products — Calibration of vertical cylindrical tanks — Part 4: Internal electro-optical distance-ranging method

Название (английский):

ISO 7507-4:2010

Petroleum and liquid petroleum products — Calibration of vertical cylindrical tanks — Part 4: Internal electro-optical distance-ranging method

Статус документа:: Действующий
Формат:: Электронный (PDF)
Количество страниц:: 24
Дата публикации:: 13 января 2010 г.
Издание:: ISO IS 7507 edition 2 version 1
ICS:: 75.180.30

Тип поставки:

Full version25 €Ask AI2 €Read online 24h10 €Read online 72h15 €

Язык документа:

ruen

Срок поставки:1 рабочий день

Цена:25 €

Описание (английский):

ISO 7507-4:2010 specifies a method for the calibration of vertical cylindrical tanks having diameters greater than 5 m by means of internal measurements using an electro-optical distance-ranging (EODR) instrument, and for the subsequent compilation of tank capacity tables. ISO 7507-4:2010 is suitable for tanks tilted up to a 3 % deviation from the vertical, provided that a correction is applied for the measured tilt as described in ISO 7507-1:2003, Clause 11. ISO 7507-4:2010 also applies to tanks with floating roofs or internal floating blankets.

Abstract

Похожие стандарты

Упомянутые в описании и другие стандарты ISO

Overview

ISO 7507-4:2010 - "Petroleum and liquid petroleum products - Calibration of vertical cylindrical tanks - Part 4: Internal electro‑optical distance‑ranging method" specifies a standardized procedure for calibrating large vertical cylindrical storage tanks (diameter > 5 m) using an internal electro‑optical distance‑ranging (EODR) instrument. The standard covers measurement planning, instrument set‑up inside the tank, selection of target points, measurement procedures, and the compilation of tank capacity tables. It applies to tanks with floating roofs or internal floating blankets and to tanks tilted up to 3% (with tilt correction per ISO 7507‑1).

Key topics and technical requirements

Scope: Calibration method for vertical cylindrical tanks > 5 m diameter; applicable to floating‑roof/blanket tanks; tilt up to 3% with correction.

Equipment & performance:

EODR angular resolution/graduation recommended ≤ 0.2 mgon (≈ 3.142×10^-4 rad).
Distance measurement graduation/resolution recommended ≤ 1 mm.
Laser safety conformity to IEC 60825‑1.

Instrument set‑up:

Stable mounting near tank centre preferred; tripod legs must be steadied (magnetic bearers or equivalent).
Two fixed reference target points marked inside the shell about 100 gon apart and near the instrument horizontal plane.

Target point selection:

Two sets per course (≈ 1/4 course height above lower seam and 1/4 below upper seam).
Minimum number of target points increases with tank circumference (e.g., 10 points for circumference ≤ 50 m up to 36 points for circumference > 300 m - see Table 1).
Targets at least 300 mm from vertical welded seams.

Measurement checks & tolerances:

Repeat reference target slope distances; uncorrected drift limit ~2 mm (differences beyond require repeat).
Angular drift tolerance example: 0.01 gon (≈ 1.571×10^-4 rad).

Supporting content:

Annex A: verification procedures for EODR instruments.
Annex B: calculations to derive internal radii.
Annex C: calibration uncertainty analysis and examples.

Practical applications & users

Used to produce tank capacity (volume–height) tables required for:

Custody transfer and inventory control in petroleum terminals.
Legal metrology and regulatory compliance.
Terminal operators, calibration laboratories, metrologists, surveyors, and quality managers responsible for tank measurement programs.

Particularly suited for large tanks and installations where internal EODR access is feasible and high‑accuracy volume data are required.

Related standards

ISO 7507‑1:2003 - Strapping method; provides tilt correction procedures referenced by Part 4.

IEC 60825‑1 - Laser product safety, cited for EODR laser classification and safe operation.

Keywords: ISO 7507-4:2010, EODR, tank calibration, calibration of vertical cylindrical tanks, tank capacity tables, petroleum tank measurement, electro‑optical distance‑ranging.

ISO 7507-4:2010

Abstract

Похожие стандарты

Overview

Key topics and technical requirements

Practical applications & users

Related standards

Технические детали

ISO 7507-1:2003

Petroleum and liquid petroleum products — Calibration of vertical cylindrical tanks — Part 1: Strapping method

SIST EN IEC 60825-12:2026

Safety of laser products - Part 12: Safety of free space optical communication systems used for transmission…

ISO 8212:1986

Soaps and detergents — Techniques of sampling during manufacture

ISO 20662:2020

Ships and marine technology — Hopper dredger supervisory and control systems

ISO 3021:2023

Adventure tourism — Hiking and trekking activities — Requirements and recommendations

ISO 3826-2:2008

Plastics collapsible containers for human blood and blood components — Part 2: Graphical symbols for use on l…

ISO/IEC 24730-1:2014

Information technology — Real-time locating systems (RTLS) — Part 1: Application programming interface (API)

ISO 8668-5:1992

Aircraft — Terminal junction systems — Part 5: Detail specification for type 3 system