EN ISO 15984:2002 PDF

Name: EN ISO 15984:2002 — Open end blind rivets with break pull mandrel and countersunk head - A2/A2 (ISO 15984:2002)
SKU: EN ISO 15984:2002
Price: 43.71 EUR
Availability: InStock

Open end blind rivets with break pull mandrel and countersunk head - A2/A2 (ISO 15984:2002)

Название (английский):

EN ISO 15984:2002

Open end blind rivets with break pull mandrel and countersunk head - A2/A2 (ISO 15984:2002)

Статус документа:: Действующий
Формат:: Электронный (PDF)
Количество страниц:: 8
Дата публикации:: 1 ноября 2002 г.
Издание:: CEN EN 15984 edition 1 version 1
ICS:: 21.060.40

Тип поставки:

Full version120 €Read online 24h10 €Read online 72h15 €

Язык документа:

ruen

Срок поставки:2 раб. дн. (перевод)

Цена:120 €

Описание (английский):

ISO 15984 specifies dimensional and mechanical characteristics and application data for open end blind rivets with break pull mandrel and countersunk head, with an austenitic stainless steel body (A2) and an austenitic stainless steel mandrel (A2) and with nominal diameters from 3 mm up to and including 5 mm.

Abstract

Похожие стандарты

Стандарты, упомянутые в описании

Overview

EN ISO 15984:2002 (ISO 15984:2002) specifies dimensional, mechanical and application data for open end blind rivets with break pull mandrel and countersunk head, manufactured from austenitic stainless steel A2/A2. The standard covers nominal diameters from 3 mm to 5 mm and defines geometry, material, mechanical properties and acceptance/testing references for these blind fasteners.

Key topics and requirements

Scope and materials

Rivet body and mandrel both A2 (austenitic stainless steel) in accordance with ISO 3506‑1.
Plain (natural) finish required.

Dimensions and tolerances

Nominal diameters: 3; 3.2; 4; 4.8; 5 mm.
Detailed head, shank and length dimensions plus recommended grip ranges are provided (see Table 1 and Figure 1 in the standard).
Clearance hole diameters (h1) are specified to avoid assembly problems and strength reductions.

Mechanical performance

Minimum shear and tensile loads and maximum mandrel break loads are specified and tested per ISO 14589. Examples:
- 3 mm: shear ≥ 1 800 N, tensile ≥ 2 200 N, mandrel break ≤ 4 100 N
- 4 mm: shear ≥ 2 700 N, tensile ≥ 3 500 N, mandrel break ≤ 6 500 N
- 5 mm: shear ≥ 4 700 N, tensile ≥ 5 800 N, mandrel break ≤ 9 000 N
Mandrel push‑out resistance must exceed 10 N.
Mandrel head retention test loads are specified (e.g., 35 N for 3/3.2 mm, 40 N for 4 mm, 45 N for 4.8/5 mm).

Quality and acceptance

Workmanship rules: burr‑free, well‑formed heads/shanks, no cracking after setting (5× magnification).
Acceptance inspection defaults to ISO 3269 unless otherwise agreed.

Designation

Example: Blind rivet ISO 15984 - 4 ×××× 12 - A2/A2

Applications and who uses it

Typical use: blind fastening where only one side of an assembly is accessible (sheet metal assemblies, enclosures, HVAC, building façade panels, general manufacturing).

Benefits of the A2/A2 combination: corrosion resistance and compatibility where stainless fasteners are needed and a countersunk head for flush finish is required.

Primary users:

Fastener manufacturers and product designers specifying rivet geometry and performance
Mechanical and structural engineers specifying blind fasteners for assemblies
Quality inspectors and test laboratories performing acceptance testing
Procurement teams ensuring conformity to EN ISO 15984 for stainless steel countersunk blind rivets

Related standards

ISO 14588 - Blind rivets: terminology and definitions

ISO 14589 - Blind rivets: mechanical testing

ISO 3506‑1 - Mechanical properties of corrosion‑resistant stainless‑steel fasteners

ISO 3269 - Fasteners: acceptance inspection

Keywords: EN ISO 15984, ISO 15984:2002, open end blind rivets, A2/A2, countersunk head, break pull mandrel, stainless steel rivets, blind fastening, mechanical properties, clearance hole.

EN ISO 15984:2002 PDF

Abstract

Похожие стандарты

Overview

Key topics and requirements

Applications and who uses it

Related standards

Технические детали

ISO 15984:2002

Open end blind rivets with break pull mandrel and countersunk head — A2/A2

SIST EN ISO 3506-1:2020

Fasteners - Mechanical properties of corrosion-resistant stainless steel fasteners - Part 1: Bolts, screws an…

SIST EN ISO 14589:2002

Blind rivets - Mechanical testing (ISO 14589:2000)

BS EN ISO 3269:2019

Fasteners. Acceptance inspection.

SIST EN ISO 15984:2003

Open end blind rivets with break pull mandrel and countersunk head - A2/A2 (ISO 15984:2002)

SIST EN ISO 14588:2002

Blind rivets - Terminology and definitions (ISO 14588:2000)