EN ISO 21254-3:2011 PDF

Name: EN ISO 21254-3:2011 — Lasers and laser-related equipment - Test methods for laser-induced damage threshold - Part 3: Assurance of laser power (energy) handling capabilities (ISO 21254-3:2011)
SKU: EN ISO 21254-3:2011
Price: 73.76 EUR
Availability: InStock

Lasers and laser-related equipment - Test methods for laser-induced damage threshold - Part 3: Assurance of laser power (energy) handling capabilities (ISO 21254-3:2011)

Название (английский):

EN ISO 21254-3:2011

Lasers and laser-related equipment - Test methods for laser-induced damage threshold - Part 3: Assurance of laser power (energy) handling capabilities (ISO 21254-3:2011)

Статус документа:: Действующий
Формат:: Электронный (PDF)
Количество страниц:: 24
Дата публикации:: 15 июля 2011 г.
Издание:: CEN EN 21254 edition 2 version 1
ICS:: 31.260

Тип поставки:

Full version360 €Read online 24h10 €Read online 72h15 €

Язык документа:

ruen

Срок поставки:4 раб. дн. (перевод)

Цена:360 €

Описание (английский):

ISO 21254-3:2011 specifies two methods of verifying the power density (energy density) handling capability of optical surfaces. The first method provides a rigorous test that fulfils the requirements at a specified confidence level in the knowledge of potential defects. The second method provides a simple, and hence inexpensive, test for an empirically derived test level.

Abstract

Похожие стандарты

Стандарты, упомянутые в описании

Overview

EN ISO 21254-3:2011 (ISO 21254-3:2011) defines standardized test methods to assure the power (energy) handling capability of optical surfaces exposed to laser radiation. It specifies two complementary approaches - a rigorous (type 1) assurance test with quantified confidence in the absence of low-threshold defects, and a simple, empirical (type 2) screening test for cost‑effective production checks. The standard applies to coated and uncoated optics across laser wavelengths and pulse lengths and supports consistent, comparable laser‑induced damage threshold (LIDT) verification.

Key topics and requirements

Two test types

Type 1 (rigorous): statistical sampling to demonstrate, at a specified confidence level (γ), that no defects below a chosen assurance level (φ) (energy or power density) are present across an agreed fraction of the optic.
Type 2 (empirical): higher‑rate, lower‑cost screening using empirically derived test levels for production environments.

Parameters and metrics

Assurance level (φ): energy density (J/cm²) for pulsed lasers, or linear power density (W/cm) for cw/quasi‑cw systems.
Assurance area and fraction tested (A, A_test, f): defines how much of the optic must be interrogated to meet the confidence goal.
Site spacing and array geometry: distance between test sites is determined from assurance area, test area and chosen packing (hexagonal or square); beam overlap (Ωx, Ωy) and beam profile (flat‑top preferred) must be considered.
Test modality: selection of 1‑on‑1 or S‑on‑1 interrogation, pulse repetition frequency, and microscopic pre/post inspection to detect damage.

Reporting and accuracy: the standard specifies test-report content and accuracy considerations to allow inter‑laboratory comparison.

Safety note: extrapolating damage data can be hazardous with toxic materials (see ISO 21254‑1); users must observe material safety precautions.

Practical applications

Acceptance testing and lot sampling of laser optics, mirrors, coatings and windows.

Non‑destructive verification for high‑power laser systems (research, industrial, medical, defense, and aerospace).

Production screening and quality assurance for optical component manufacturers.

Sub‑aperture inspection and witness sampling during assembly or integration of laser systems.

Related standards

ISO 21254‑1:2011 - Definitions and general principles (referenced normative)

ISO 21254‑2 - Threshold determination methods

ISO 21254‑4 - Inspection, detection and measurement (Technical Report)

ISO 11145 - Optics and photonics vocabulary and symbols

Keywords: laser-induced damage threshold, LIDT, power density, energy density, assurance test, optical components, flat-top beam, confidence level, laser damage testing.

EN ISO 21254-3:2011 PDF

Abstract

Похожие стандарты

Overview

Key topics and requirements

Practical applications

Who should use this standard

Related standards

Технические детали

ISO 21254-3:2011

Lasers and laser-related equipment — Test methods for laser-induced damage threshold — Part 3: Assurance of l…

ISO 21254-1:2011

Lasers and laser-related equipment — Test methods for laser-induced damage threshold — Part 1: Definitions an…

SIST EN ISO 21254-1:2025

Lasers and laser-related equipment - Test methods for laser-induced damage threshold - Part 1: Definitions an…

BS EN ISO 21254-2:2011

Lasers and laser-related equipment. Test methods for laser-induced damage threshold. Threshold determination.

BS EN ISO 11145:2018

Optics and photonics. Lasers and laser-related equipment. Vocabulary and symbols.